Krell Industries S-1000 manual Prev Key, Mute Key, Enter Key, Directional Keys

Page 17

Front Panel Description, continued

REMOTE ONLY FUNCTIONS,

continued

30Prev Key

Use this key to return to the previously displayed setup menu screen.

31Mute Key

Use this key to mute the S–1000 output. When this function is active, VOLUME MUTE appears in the front panel display.

32Enter Key

Use this key to accept setup menu selections, accept an input device selection, or display current system conditions.

33Directional Keys

IN THE OPERATIONAL MODE

Right Directional Key. Use this key to engage the Digital Room Equalizer.

Up and Down Directional Keys. Use these keys to select EQ

memory.

IN THE MENU MODE

All Directional Keys. Use all four directional keys to navigate the on-screen menus.

Up and Down Directional Keys. Use these keys to adjust vol- ume, balance, and selective volume for the center loudspeaker, surround loudspeakers, and subwoofer.

Krell S–1000

13

Page 16 Page 18
Image 17
Page 16 Page 18
Contents
Surround Information ContactContents Illustrations TablesIntroduction Input and Output Definition of TermsConnections OperationHdmi Technology VideoUnpacking AC Power Guidelines PlacementGetting Started Front Panel Functions Front Panel and Remote Control Description Decoding Modes TV Button/Key Mode 1 Button/LED/M1 Key Mode 2 Button/LED/M2 Key CD Button/Key Tuner Button/KeyPreamp Button/LED/Key Pro Logic II Button/LED/PL KeyDisplay Window Front Panel Display IndividualizedSurr/Back Button/LED/Rear Key Volume Knob/Directional KeysSub Button/LED/Key Balance Button/LED/Bal KeyBattery Installation and Removal Remote Control Only DescriptionAmp Key Power Amp Key Menu KeyMute Key Prev KeyEnter Key Directional KeysProcessor Back Panel FunctionsOther available modes. See Decoding Modes, on Back Panel Description Digital Audio Outputs Video Inputs Outputs Coaxial Digital Audio InputsVideo Outputs Video InputsBack Panel Power Switch Power Connections Comm Port RS-232 ConnectorIEC Connector 55 RC-5First Connect Analog Digital Sources Connecting the S-1000 to Your SystemVideo, and composite. There is no OSD available from Next Connect Video SourcesConnect Amplifiers LastSteps Overview System Configuration and NavigationConfiguration Conventions NavigationDirection or Level Keys Pre KeyMain Menu System ConfigurationAccessing Menu Configure Speakers SetupStep Listening RoomSpeakers simultaneously Sends 20Hz to 20KHz signals to the loudspeakerDigital 5.1 or DTS 5.1 encoded software Speaker in your system Speaker DistanceSecond option on the speaker main menu screen, Speaker DIS Auto Noise Sequence Calibrate VolumeOption Manual Noise SequenceProgram Material Digital inputs. See , on System matches the factory defaultsS-1000 is shipped with pre-selected connections for each Assign Video Input Configure DevicesChoose a standard video format Audio Inputs screen appears Assign Analog AudioInputs Assign Digital Audio Ly useful for Sacd playersMigration to be active Delay Lip synchronization screen allows you to add an adjustableProjector, when the image is delayed by video processing Delay screen appearsEQ Memory screen appears Assign EQ MemoryConfigure Trigger Configuring Additional Inputs URE Levels screen appears Input device is selected it has a range of +/- 15 dB Device TrimConfiguring Analog Input Trim Analog Input Trim Mode SUB Trim screen appears Music Mode Sub TrimControl screen appears DTS ControlFrom the left and right channels focused sound field Mutes the center channel Center. The default setting is 3 neutralPlii Control Screen OSD Operation EqualizerAppears, with the cursor blinking at OSD Operation On-screen display appears Information remains on the screenReturn to the Operation menu Audio OperationDTS mode hold sets the time your S-1000 remains in DTS mode Dolby mode hold sets the time your S-1000 remains in DolbyOr satellite receiver. The adjustment range is 0 no hold Use the dynamic range screen to adjust the dynamic rangeInput Setup Screen Input SetupProgram Remote System Information Treble to comprehensive room correction. The Digital Room There are four Room EQ setup memories, each of which savesAre filter type, frequency, shape, and level For video game softwareRecalling Customized Settings and Restoring the Factory Room EQ Setup Audible if you have a source device playing Remote. The S-1000 is now in the operational modeFactory Default SettingsSystem Settings Saving CustomizedON/OFF/STAND-BY Tape Input Output Operating the S-1000Simulcast Detected Modes Appendix Decoding Modes for the S-1000Automatically Dolby Pro Logic II Modes DTS Neo6 Modes Matrix mode is useful for monaural recordingsLoudspeakers that operate within each mode When listening to music. The table below lists the modesKrell Music Surround ModesWarranty Warranty Accessing the Service Request Form Return Authorization ProcedureService@krellonline.com Serial NumberDistortion THD Inputs SpecificationsSpecifications 07.0 1000PREAMP/PROCESSOR
Top Page Image Contents