Krell Industries S-1000 manual Placement, AC Power Guidelines

Placement

AC POWER

GUIDELINES

Before you install the S–1000 Surround Preamp/processor into your system, review the following guidelines to choose the location for the component. This will facilitate a clean, trouble-free installation.

The S–1000 does not require any type of special rack or cabinet for installation. For the dimensions of your S–1000 see Specifications, on pages 66-67.

The S–1000 requires at least two inches (5 cm) of clearance on each side and at least two inches (5 cm) of clearance above and below the component to provide adequate ventilation. In addition, the

S–1000 requires at least three inches (7 cm) of clearance between other connected components. For installations inside cabinetry, extra ventilation may be necessary.

The S–1000 has superb regulation and does not require a dedicated AC circuit. Avoid connections through extension cords or multiple AC adapters. High quality 15 amp grounded AC strips are accept- able.

High quality AC line conditioners or filters may be used if they are grounded and meet or exceed the unit’s power supply rating of 100 VA.

Use the S–1000 only with the power cord supplied.