Hold to 30 seconds, To 30 seconds | Krell Industries S-1000 specs

Krell Industries Dolby mode hold sets the time your S-1000 remains in Dolby, To 30 seconds

Page 53

System Configuration, continued

Step 4, Operation

Audio Operation, continued		DOLBY MODE HOLD
		Dolby mode hold sets the time your S–1000 remains in Dolby
		Digital mode when the incoming bitstream is interrupted. Bitstreams
		are interrupted in some devices when you press and release fast
		forward, track back/forward, or change channels for a compact
		disc, video disc, or satellite receiver. The adjustment range is 0 (no
		hold) to 30 seconds.
		DTS MODE HOLD
		DTS mode hold sets the time your S–1000 remains in DTS mode
		when the incoming bitstream is interrupted. Bitstreams are interrupt-
		ed in some devices when you press and release fast forward, track
		back/forward, or change channels for a compact disc, video disc,
		or satellite receiver. The adjustment range is 0 (no hold)
		to 30 seconds.
		EX AUTO SWITCHING
		When ENABLED, the S–1000 will automatically engage Dolby Digital
		Surround EX decoding if it receives a bitstream that is encoded in
		this format. When this feature is DISABLED, you must manually select
		Dolby Digital Surround EX decoding.
		DYNAMIC RANGE
		Use the dynamic range screen to adjust the dynamic range of the
		S–1000. Options are:
		NORMAL
		11 dB of compression
		MAX
		no compression
		NIGHT
		22 dB of compression
		After setting your selections, press the previous key (30) once to

	Prev
		return to the OPERATION menu.
		return to the OPERATION menu.

Krell S–1000

Image 53

Contents

Surround Information ContactContents Illustrations TablesIntroduction Input and Output Definition of TermsConnections OperationHdmi Technology VideoUnpacking AC Power Guidelines PlacementGetting Started Front Panel Functions Front Panel and Remote Control DescriptionDecoding Modes TV Button/Key Mode 1 Button/LED/M1 Key Mode 2 Button/LED/M2 KeyCD Button/Key Tuner Button/KeyPreamp Button/LED/Key Pro Logic II Button/LED/PL KeyDisplay Window Front Panel Display IndividualizedSurr/Back Button/LED/Rear Key Volume Knob/Directional KeysSub Button/LED/Key Balance Button/LED/Bal KeyBattery Installation and Removal Remote Control Only DescriptionAmp Key Power Amp Key Menu KeyMute Key Prev KeyEnter Key Directional KeysProcessor Back Panel FunctionsOther available modes. See Decoding Modes, on Back Panel Description Digital Audio Outputs Video Inputs Outputs Coaxial Digital Audio InputsVideo Outputs Video InputsBack Panel Power Switch Power Connections Comm Port RS-232 ConnectorIEC Connector 55 RC-5First Connect Analog Digital Sources Connecting the S-1000 to Your SystemVideo, and composite. There is no OSD available from Next Connect Video SourcesConnect Amplifiers LastSteps Overview System Configuration and NavigationConfiguration Conventions NavigationDirection or Level Keys Pre KeyMain Menu System ConfigurationAccessing Menu Configure Speakers SetupStep Listening RoomSpeakers simultaneously Sends 20Hz to 20KHz signals to the loudspeakerDigital 5.1 or DTS 5.1 encoded software Speaker in your system Speaker DistanceSecond option on the speaker main menu screen, Speaker DIS Auto Noise Sequence Calibrate VolumeOption Manual Noise SequenceProgram Material Digital inputs. See , on System matches the factory defaultsS-1000 is shipped with pre-selected connections for each Assign Video Input Configure DevicesChoose a standard video format Audio Inputs screen appears Assign Analog AudioInputs Assign Digital Audio Ly useful for Sacd playersMigration to be active Delay Lip synchronization screen allows you to add an adjustableProjector, when the image is delayed by video processing Delay screen appearsEQ Memory screen appears Assign EQ MemoryConfigure Trigger Configuring Additional Inputs URE Levels screen appears Input device is selected it has a range of +/- 15 dB Device TrimConfiguring Analog Input Trim Analog Input Trim Mode SUB Trim screen appears Music Mode Sub TrimControl screen appears DTS ControlFrom the left and right channels focused sound field Mutes the center channel Center. The default setting is 3 neutral Plii Control Screen OSD Operation EqualizerAppears, with the cursor blinking at OSD Operation On-screen display appears Information remains on the screenReturn to the Operation menu Audio OperationDTS mode hold sets the time your S-1000 remains in DTS mode Dolby mode hold sets the time your S-1000 remains in DolbyOr satellite receiver. The adjustment range is 0 no hold Use the dynamic range screen to adjust the dynamic rangeInput Setup Screen Input SetupProgram Remote System Information Treble to comprehensive room correction. The Digital Room There are four Room EQ setup memories, each of which savesAre filter type, frequency, shape, and level For video game softwareRecalling Customized Settings and Restoring the Factory Room EQ Setup Audible if you have a source device playing Remote. The S-1000 is now in the operational modeFactory Default SettingsSystem Settings Saving CustomizedON/OFF/STAND-BY Tape Input Output Operating the S-1000Simulcast Detected Modes Appendix Decoding Modes for the S-1000Automatically Dolby Pro Logic II Modes DTS Neo6 Modes Matrix mode is useful for monaural recordingsLoudspeakers that operate within each mode When listening to music. The table below lists the modesKrell Music Surround ModesWarranty Warranty Accessing the Service Request Form Return Authorization ProcedureService@krellonline.com Serial NumberDistortion THD Inputs SpecificationsSpecifications 07.0 1000PREAMP/PROCESSOR

Krell Industries Dolby mode hold sets the time your S-1000 remains in Dolby, To 30 seconds

Dolby mode hold sets the time your S–1000 remains in Dolby

hold) to 30 seconds.

DTS mode hold sets the time your S–1000 remains in DTS mode

or satellite receiver. The adjustment range is 0 (no hold)

to 30 seconds.

Dolby Digital Surround EX decoding.

Use the dynamic range screen to adjust the dynamic range of the

S–1000. Options are:

11 dB of compression

no compression

return to the OPERATION menu.