System Configuration, continued
Step 3, Configure Level Adjustment
Analog Input Trim
Analog Input Trim Screen
ANTI-CLIP
INPUT GAIN
Use the ANALOG INPUT TRIM menu to adjust the level of an analog input source to the S–1000.
Select ANALOG INPUT TRIM from the CONFIGURE LEVELS menu. The ANALOG
INPUT TRIM screen appears:
Use the direction keys (75) to select the anti-clip option you want (ON or OFF) and the input gain decibel level. Krell recommends leaving anti-clip ON.
ON
The anti-clip function measures the signal level and prevents the input signal from overloading (clipping) the analog-to-digital convert- ers.
OFF
Disengages the anti-clip function. This may result in distorted sound.
Boost weaker signals by increasing the input gain value. Use the direction and enter keys to select the number of dB.
To maximize your system’s signal-to-noise ratio without clipping, increase the input gain value applied to the signal until you see the clip indicator illuminate on the screen; then back the input gain value off one step. The optimal signal gain value will vary from source to source.
Prev After selecting the anti-clip and input gain options for your analog devices, press the previous key (30) once to return to the CONFIGURE
LEVELS menu.
Surround
Contact
Information
Contents
Tables
Illustrations
Introduction
Connections
Definition of Terms
Input and Output
Operation
Technology Video
Hdmi
Unpacking
Placement
AC Power Guidelines
Getting Started
Front Panel
Front Panel and Remote Control Description
Functions
CD Button/Key
Mode 1 Button/LED/M1 Key Mode 2 Button/LED/M2 Key
Decoding Modes TV Button/Key
Tuner Button/Key
Display Window Front Panel Display
Pro Logic II Button/LED/PL Key
Preamp Button/LED/Key
Individualized
Sub Button/LED/Key
Volume Knob/Directional Keys
Surr/Back Button/LED/Rear Key
Balance Button/LED/Bal Key
Amp Key Power Amp Key
Remote Control Only Description
Battery Installation and Removal
Menu Key
Enter Key
Prev Key
Mute Key
Directional Keys
Back Panel Functions
Processor
Other available modes. See Decoding Modes, on
Back Panel Description
Video Outputs
Video Inputs Outputs Coaxial Digital Audio Inputs
Digital Audio Outputs
Video Inputs
IEC Connector
Power Connections Comm Port RS-232 Connector
Back Panel Power Switch
55 RC-5
Connecting the S-1000 to Your System
First Connect Analog Digital Sources
Next Connect Video Sources
Video, and composite. There is no OSD available from
Last
Connect Amplifiers
Configuration
Overview System Configuration and Navigation
Steps
Direction or Level Keys
Navigation
Conventions
Pre Key
Accessing Menu
System Configuration
Main Menu
Step
Setup
Configure Speakers
Listening Room
Digital 5.1 or DTS 5.1 encoded software
Sends 20Hz to 20KHz signals to the loudspeaker
Speakers simultaneously
Second option on the speaker main menu screen, Speaker DIS
Speaker Distance
Speaker in your system
Calibrate Volume
Auto Noise Sequence
Program Material
Manual Noise Sequence
Option
S-1000 is shipped with pre-selected connections for each
System matches the factory defaults
Digital inputs. See , on
Configure Devices
Assign Video Input
Choose a standard video format
Inputs
Assign Analog Audio
Audio Inputs screen appears
Migration to be active
Ly useful for Sacd players
Assign Digital Audio
Projector, when the image is delayed by video processing
Lip synchronization screen allows you to add an adjustable
Delay
Delay screen appears
Assign EQ Memory
EQ Memory screen appears
Configure Trigger
Configuring Additional Inputs
URE Levels screen appears
Device Trim
Input device is selected it has a range of +/- 15 dB
Configuring Analog Input Trim
Analog Input Trim
Music Mode Sub Trim
Mode SUB Trim screen appears
From the left and right channels focused sound field
DTS Control
Control screen appears
Plii Control
Center. The default setting is 3 neutral
Mutes the center channel
Screen
Appears, with the cursor blinking at OSD Operation
Equalizer
OSD Operation
Return to the Operation menu
Information remains on the screen
On-screen display appears
Audio Operation
Or satellite receiver. The adjustment range is 0 no hold
Dolby mode hold sets the time your S-1000 remains in Dolby
DTS mode hold sets the time your S-1000 remains in DTS mode
Use the dynamic range screen to adjust the dynamic range
Input Setup
Input Setup Screen
Program Remote
System Information
Are filter type, frequency, shape, and level
There are four Room EQ setup memories, each of which saves
Treble to comprehensive room correction. The Digital Room
For video game software
Recalling Customized Settings and Restoring the Factory
Room EQ Setup
Remote. The S-1000 is now in the operational mode
Audible if you have a source device playing
System Settings
Settings
Factory Default
Saving Customized
Operating the S-1000
ON/OFF/STAND-BY Tape Input Output
Simulcast
Automatically
Appendix Decoding Modes for the S-1000
Detected Modes
Matrix mode is useful for monaural recordings
Dolby Pro Logic II Modes DTS Neo6 Modes
Krell Music Surround
When listening to music. The table below lists the modes
Loudspeakers that operate within each mode
Modes
Warranty
Warranty
Service@krellonline.com
Return Authorization Procedure
Accessing the Service Request Form
Serial Number
Specifications
Distortion THD Inputs
Specifications
PREAMP/PROCESSOR
1000
07.0