Assembling the Window

1.Attach the Side Window Frames (34) to the Top Window Frame (33), as shown below to the right.

2.	Insert Short Bolts (59) into the holes at the bottom of the Side	33

Window Frames (34), so that the threads stick out the bottom of 34 the window.

3.Remove the protective film from both sides of the Window Pane (51). Slide the Window Pane (51) into the three-sided frame.

4.Slide the Bottom Window Frame (35) onto the two Short Bolts (59) and the Window Pane (51). Secure it in place with Nuts (61). You may need to apply some pressure to the heads of the Bolts through the Window Pane to allow the Nuts to thread on properly.

5.Attach the Window Brace (38) to the Bottom Window Frame (35) using two Window Screws (58). The holes on the Window Brace (38) should face away from the win- dow.

6.Slide the top edge of the Top Window Frame (33) into the slot at the top of the Crown (15b), see illustration to the right. The win- dow should be aligned with the Window Brace (38) underneath it. Slide the window into place over the Window Support Beam (36). Gradually lower it into place.

15a/

15b

7.Using two Window Screws (58), attach the Window Stop (37) to

the Window Support Beam (36) with its tab pointing towards the Crown (*10, 11). It should be on the underside of the Window Support Beam, inside the greenhouse.

8.Loosen the Nuts (61) holding the Window Support Beam (36) in place and slide the Window Support Beam (36) up to touch the window. Secure it in place.

9.Repeat steps 1-8 for the other window.

Assembling the Doors

The doors are assembled using the Door Screws (57). The Screws thread directly into the rounded portions of the parts in the center of the doors.

1. Place an Outer Door Frame (27a) with the slotted side down. Attach two Center Door Frames (31) to the Outer Door Frame

(27a). Assemble them with the rounded portion facing the front, 27a	31

as shown to the right.

2.Attach an Inner Door Frame (27b) to the other side of the Center Door Frames (31) in the same way.

SKU 93920

For technical questions, please call 1-800-444-3353.

Page 13