Storage
1.Wait for engine to cool, then clean engine with clean cloth.
2.When the engine is to remain idle for longer than 20 days, prepare the engine for storage as follows:
a.Change engine oil and empty fuel tank.
b.Either leave fuel tank empty or refill fuel tank with fresh unleaded gasoline mixed with a fuel stabilizer intended for long term engine storage (not included).
After filling, run engine for about
c.Clean out area around spark plug. Remove spark plug and pour one tablespoon of engine oil into cylinder through spark plug hole.
d.Reinstall spark plug, but leave spark plug wire disconnected.
e.Pull recoil starter to distribute oil in cylinder. Stop after one or two revolutions when you feel the piston start the compression stroke (when you start to feel resistance).
3.Apply a thin coat of rust preventive oil to all uncoated metal parts.
4.Cover and store in a dry,
5.Before starting the engine after storage, keep in mind that untreated gasoline will deteriorate quickly. Drain the fuel tank and filter, and change to fresh fuel if untreated gasoline has been sitting for a month, if treated gasoline has been sitting beyond the fuel stabilizer’s recommended time period, or if the engine does not start properly.
SKU 96156 | For technical questions, please call | Page 13 |