Harbor Freight Tools 96156 manual Service precautions

Page 5

16.This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)

17.When spills of fuel or oil occur, they must be cleaned up immediately. Dispose

of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom- ventilated, covered, metal container.

18.Keep hands and feet away from moving parts. Do not reach over or across engine while operating.

19.Before use, check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the engine’s operation. If damaged, have the engine serviced before using. Many accidents are caused by poorly maintained engines.

20.Use the correct engine for the application. Do not modify the engine and do not use the engine for a purpose for which it is not intended. Install on Lawn mower only.

21.Follow lawn mower manufacturer’s operation precautions.

Service precautions

1.Before service, maintenance, or cleaning:

a.Close the engine’s fuel valve.

b.Allow the engine to completely cool.

c.Then, remove the spark plug wire(s) from the spark plug(s).

2.Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechanical

guards, and heat shields, among other guards.

3.Do not alter or adjust any part of the engine that is sealed by the manufacturer or distributor.

4.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/ respirator during service.

5.Maintain labels and nameplates on the engine. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

6.Have the engine serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the engine is maintained. Do not attempt any service or maintenance procedures not explained in this manual or any procedures that you are uncertain about your ability to perform safely or correctly.

The engine brake is for emergency shutoff; do not replace the brake spring with a weaker spring.

7.Store engine out of the reach of children.

8.Follow scheduled maintenance.

9.Refueling Precautions:

a.Do not smoke, or allow sparks, flames, or other sources of ignition around the engine, especially when refuelling.

b.Do not refill the fuel tank while the engine is running or hot.

c.Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.

d.Refuel in a well-ventilated area only.

Save these instructions.

SKU 96156

For technical questions, please call 1-800-444-3353.

Page 5

Image 5
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callContents Save This Manual Installation precautionsCarbon Monoxide Hazard Using an engine indoors Operating precautionsService precautions Unpacking SpecificationsInstallation Make sure the hardware does not contact moving parts See Figure aStarting the Engine Operating InstructionsTo shut off the engine, release the mower’s brake handle Break-in Period Air Filter Element Maintenance Maintenance ProceduresServicing SKU For technical questions, please callEvery 25 Operation Hours Thereafter Cleaning, Maintenance, Lubrication ScheduleAfter Initial 20 Operation Hour Period Storage Engine will not start TroubleshootingEngine stops Problem Possible Causes Probable Solutions Engine misfiresSuddenly Engine knocksPart Description ’ty Parts ListAssembly Diagram Please Read the Following Carefully Emission Control System WarrantyOwner’s Warranty Responsibilities
Related manuals
Manual 19 pages 41.16 Kb