Harbor Freight Tools 91840, 91839 Connecting the Rail Assembly 2 to the Oil Tank Assembly 10B

Page 5

Assembly (continued)

Connecting the Rail Assembly (2) to the Oil Tank Assembly (10B)

1.Insert the Front Leg Assembly (11) into the bracket on the Oil Tank Assembly (10B). Insert the remaining Hex Head Bolt (16) through the hole in the middle of the bracket of the Oil Tank Assembly (10B). Secure it with a Hex Head Nut (17). Refer to the Hex Head Nut (17) attached to the Hex Head Bolt (16) at the top of the Front Leg Assembly (11) in FIGURE 1 below. Note: When travelling, remove the Push Pin

(26) and Hair Pin Clip (29) and lift the Front Leg Assembly up so that it is parallel to the Rail Assembly (2). Then, replace the Push Pin (26) and Hair Pin Clip (29) into the Horizontal Transport Hole shown just above the Oil Plug (37), in FIGURES 1 and 2.

2.To connect the Rail Assembly (2) to the Oil Tank Assembly (10B), insert a Hex Head Bolt (16) into the middle hole of the “L” shaped bracket on the Oil Tank Assembly (10B). Secure it with a Hex Head Nut (17). Refer to the Hex Head Nut (17) attached to the Hex Head Bolt (16) just above the tire in FIGURE 1 below. Insert the Push Pin (26) through the hole, as shown in FIGURE 3.

3.In FIGURES 1 and 2, the Rail Assembly (2) is shown in Horizontal mode for opera- tion and travel (as mentioned above, the Front Leg Assembly (11) must be secured up in the horizontal position when travelling). For vertical operation see page 6.

FIGURE 1

Slide Assembly (3)

Safety Chain

Cylinder (1)

with Hook (4)

 

 

 

 

 

Base

Place Log Here

Hitch Coupler (9)

Hex Head Nut (17) is attached to Hex Head Bolt (16)

 

 

Horizontal transport hole

 

 

 

 

Push Pin (26)

Rail Assembly (2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vertical Position Hole

 

 

Push Pin (26) and

 

 

 

 

 

 

Hair Pin Clip (29)

 

 

Oil Plug (37)

Hex Head Nut (17) is

 

 

 

 

 

 

 

 

 

 

 

with air inlet hole

attached to Hex Head Bolt

Front Leg Assembly (11)

 

 

 

 

 

 

 

 

(16)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vertical position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

locking hole

 

 

 

 

 

 

 

Oil Removal Plug

 

 

 

Oil Tank (10B)

 

 

Wheel Cap (61)

 

 

 

 

 

 

 

 

 

 

 

FIGURE 2

Horizontal transport hole

Close-up of Push Pin (26) securing the Front Leg Assembly (11) to the bracket on the Oil Tank Assembly (10B).

FIGURE 3

Second Push Pin (26) secures Rail Assembly (2), and is removed for vertical log splitting.

Air Inlet Hole

Push Pin (26)

Oil Plug (37) with air inlet hole

SKUs

91839, 91840

For replacement parts, please call 1-800-444-3353.

Page

 

& 92199

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callSafety Warnings and Precautions SpecificationsRead all instructions before using this tool For replacement parts, please callNever attempt to split two logs on top of each other Never leave the Log Splitter unattended while in operationAttaching the Tires AssemblyUnpacking Place Log Here Connecting the Rail Assembly 2 to the Oil Tank Assembly 10BTransportation OperationThrottle Choke Starter Cord Bleeding the Hydraulic System MaintenancePart Description Qty Parts ListAssembly Drawing Kits Hydraulic Ram SealsSeal Hydraulics Drawing Bearing Packing Instructions

91840, 92199, 91839 specifications

Harbor Freight Tools offers an array of high-quality tools and equipment, among which the models 91839, 92199, and 91840 stand out for their functionality, versatility, and reliability. These tools are designed to meet the needs of both professional tradespeople and DIY enthusiasts, making them essential additions to any workshop.

The Harbor Freight Tools 91839 model is a compact air compressor that delivers an impressive performance in a space-saving design. It features a powerful 1.5 HP motor that generates sufficient air pressure for various pneumatic tools. The 91839 is equipped with a large 4-gallon tank, allowing for extended use without frequent cycling. Its lightweight and portable design come with a comfortable handle, making it easy to transport from one job site to another. Additionally, the unit operates quietly, minimizing noise pollution during use, which is particularly advantageous for residential areas.

The 92199 model, on the other hand, is a versatile tool chest that brings organization and efficiency to any garage or workshop. Constructed from durable steel, this tool chest boasts a sleek powder-coated finish that resists scratches and corrosion. With multiple drawers of varying sizes, users can easily store and access their tools, while a built-in lock ensures security. The ball-bearing slides allow for smooth opening and closing of drawers, even when fully loaded. Its ample storage space, combined with a compact footprint, makes it an excellent choice for users looking to maximize their workspace.

The Harbor Freight Tools 91840 is a high-performance impact wrench that delivers impressive torque, making it suitable for a wide range of applications, from automotive repairs to construction projects. Featuring a powerful motor, this impact wrench can effortlessly drive and remove fasteners with ease. Its compact design ensures that it can access tight spaces, providing users with versatility in various working environments. Moreover, the ergonomic handle offers a comfortable grip, reducing fatigue during prolonged use.

In summary, Harbor Freight Tools models 91839, 92199, and 91840 each bring unique features and technologies that cater to the demands of today’s professionals and hobbyists alike. From the efficient air compressor to the rugged tool chest and the powerful impact wrench, these tools exemplify quality and reliability, ensuring that users can tackle any project with confidence.
Top Page Image Contents