Harbor Freight Tools 94191 warranty PRE-START Instructions, To Add Engine Oil

Page 12

8.12 Volt DC Fuse (8): The 12 Volt DC Outlet has one Fuse (8) to protect the Genera- tor from overloading. The Generator is equipped with the following size and type of Fuse: F10A250V. Should a 12 VDC output exceed the fuse’s rating, always check to see if the Fuse has “blown” (a melted filament within the Fuse). If necessary, unplug all electrical loads from the Generator, replace with a new Fuse, and reat- tach a reduced load to the generator. (See Figure D.)

9.Power-On Light (10): Indicates voltage is being provided by the Generator.

(See Figure D.)

PRE-START INSTRUCTIONS

To Add Engine Oil:

1.CAUTION! Your warranty is voided if you do not put engine oil in the Engine’s crankcase prior to its first use. Before each use, check the oil level. Never run the Engine with low or no engine oil. Running the engine with low or no oil will perma- nently damage the Engine.

OIL DIPSTICK

(65A)

FUEL TANK CAP

FUEL FILTER (34) (32)

FUEL GAUGE

(35)

FUEL TANK

(31)

FIGURE E

2.The Engine MUST be filled with a high quality grade engine oil. If the Engine will be run in temperatures above 32 degrees Fahrenheit, use SAE 30 weight oil. If the

SKU 94191

For technical questions, please call 1-800-444-3353.

Page 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Your Warranty Is Voided If For technical questions or replacement parts, please callSpecifications General Safety Rules and PrecautionsSave this Manual Work AreaPersonal Safety Tool USE and CareSKU For technical questions, please call Specific Safety Rules and Precautions ServiceFire and Explosion Precautions Mechanical PrecautionsChemical Precautions Use only Engine manufacturer recommended fuel and oilNoise Precautions Electrical PrecautionsInsulate all connections and disconnected wires MISC. Precautions Nameplate Extension Cord Length120 or 240 Volt At full loadAssembly Instructions To Install The Battery not includedUnpacking See Figure BInstallation Instructions General LocationControl Panel Features Grounding The GeneratorSee Figure C See Figure DFigure D PRE-START Instructions To Add Engine OilOperating Instructions See Figure ESee Figure E To Fill The Fuel Tank To Start The Engine/Generator See Figure FTo Connect Electrical Loads Volts x Amps = Watts example 120 volts x 3 amps = 360 watts See Figure F SKU For technical questions, please callINSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipment Generator maintenanceEngine maintenance See Figure GFuel Tank CAP Fuel Filter Troubleshooting Please Read the Following Carefully Parts List Generator Assembly Diagram Generator Parts List Engine Part Description QtyAssembly Diagram Engine SKU 94191 For technical questions, please callLimited 1 year warranty Owner’s Warranty ResponsibilitiesNo Charge Repair or Replacement Service and MaintenanceLength of Coverage Consequential Damages CoverageElectrical Diagram

94191 specifications

Harbor Freight Tools is widely recognized for delivering high-quality tools at affordable prices, and one of the standout products in their lineup is the 94191 6-Inch Bench Grinder. This versatile tool is perfect for both DIY enthusiasts and seasoned professionals alike, providing a powerful solution for sharpening, grinding, and polishing tasks.

One of the main features of the Harbor Freight Tools 94191 is its robust 2.1 amp motor, which provides a reliable power source for various grinding applications. The motor allows the grinder to reach a maximum speed of 3,450 revolutions per minute (RPM), ensuring effective material removal and efficiency. This makes the tool ideal for sharpening blades, shaping metal, or removing rust and corrosion.

The 94191 model features a well-designed cast iron base that provides stability during operation. The vibration-free design contributes to more accurate grinding and enhances safety, reducing the risk of accidents. Additionally, the grinder comes equipped with two grinding wheels: a coarse wheel for quick material removal and a fine wheel for precision sharpening. The dual-wheel setup allows users to switch between different grinding tasks without needing to change tools.

Another great characteristic of the Harbor Freight Tools 94191 is the adjustable eye shields. These shields help protect users' eyes from debris while providing a clear view of their work. The adjustable nature of the shields allows users to position them at various angles, enhancing safety while ensuring visibility during operations.

Additionally, the bench grinder is designed with a built-in work light, which illuminates the workspace and improves visibility, especially in dim lighting conditions. This feature is particularly useful for users needing detailed work while ensuring they maintain consistency and accuracy.

The Harbor Freight Tools 94191 also integrates a maintenance-free design, making it easy to use without requiring extensive upkeep. The inclusion of rubber feet ensures stability during operation and helps absorb vibration, prolonging the tool's lifespan.

In summary, the Harbor Freight Tools 94191 6-Inch Bench Grinder is a powerful, user-friendly tool that combines various features and technologies tailored to meet the needs of any metalworking task. With its robust motor, dual-wheel setup, adjustable eye shields, built-in work light, and durable construction, this bench grinder is an excellent addition to any workshop, whether for professional or personal use.
Top Page Image Contents