Harbor Freight Tools 94191 warranty Installation Instructions, General Location

Page 9

INSTALLATION INSTRUCTIONS

1.Electrical and other permits may be required for the installation of emergency or portable power systems. Investigate the local building and electrical codes before installing this unit.

2.Prior to providing Generator power to tools and equipment, make sure the Gen- erator’s rated voltage, wattage, and amperage capacity is adequate to supply all electrical loads the unit will power. If powering exceeds the Generator’s capacity, it may be necessary to group one or more of the tools/equipment for connection to a separate Generator.

General Location:

1.It is recommended to locate the Generator (outdoors only) where cooling air is readily available. Locate the Generator so that the air inlets and outlets are not blocked by obstructions such as bushes, trees, or snow drifts. Locating it in the path of heavy winds or snowdrifts may require the placement of a barrier for protection. The air inlet (on Air Filter Cover 18a), in normal weather conditions, should face the prevailing wind direction.

2.Locate the Generator on a concrete slab or other area where rain drainage or flood waters can not reach it.

3.Generator placement should allow four feet of access to all sides for maintenance and for proper air cooling.

4.Place the Generator as close as possible to the electrical tools and equipment be- ing powered to reduce the length of extension cords.

SKU 94191

For technical questions, please call 1-800-444-3353.

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents For technical questions or replacement parts, please call Your Warranty Is Voided IfGeneral Safety Rules and Precautions SpecificationsSave this Manual Work AreaPersonal Safety Tool USE and CareSKU For technical questions, please call Service Specific Safety Rules and PrecautionsMechanical Precautions Fire and Explosion PrecautionsChemical Precautions Use only Engine manufacturer recommended fuel and oilNoise Precautions Electrical PrecautionsInsulate all connections and disconnected wires Nameplate Extension Cord Length MISC. Precautions120 or 240 Volt At full loadTo Install The Battery not included Assembly InstructionsUnpacking See Figure BGeneral Location Installation InstructionsGrounding The Generator Control Panel FeaturesSee Figure C See Figure DFigure D To Add Engine Oil PRE-START InstructionsOperating Instructions See Figure ESee Figure E To Fill The Fuel Tank To Start The Engine/Generator See Figure FTo Connect Electrical Loads See Figure F SKU For technical questions, please call Volts x Amps = Watts example 120 volts x 3 amps = 360 wattsDo not use damaged equipment Generator maintenance INSPECTION, MAINTENANCE, and CleaningSee Figure G Engine maintenanceFuel Tank CAP Fuel Filter Troubleshooting Please Read the Following Carefully Parts List Generator Assembly Diagram Generator Part Description Qty Parts List EngineSKU 94191 For technical questions, please call Assembly Diagram EngineOwner’s Warranty Responsibilities Limited 1 year warrantyService and Maintenance No Charge Repair or ReplacementLength of Coverage Consequential Damages CoverageElectrical Diagram

94191 specifications

Harbor Freight Tools is widely recognized for delivering high-quality tools at affordable prices, and one of the standout products in their lineup is the 94191 6-Inch Bench Grinder. This versatile tool is perfect for both DIY enthusiasts and seasoned professionals alike, providing a powerful solution for sharpening, grinding, and polishing tasks.

One of the main features of the Harbor Freight Tools 94191 is its robust 2.1 amp motor, which provides a reliable power source for various grinding applications. The motor allows the grinder to reach a maximum speed of 3,450 revolutions per minute (RPM), ensuring effective material removal and efficiency. This makes the tool ideal for sharpening blades, shaping metal, or removing rust and corrosion.

The 94191 model features a well-designed cast iron base that provides stability during operation. The vibration-free design contributes to more accurate grinding and enhances safety, reducing the risk of accidents. Additionally, the grinder comes equipped with two grinding wheels: a coarse wheel for quick material removal and a fine wheel for precision sharpening. The dual-wheel setup allows users to switch between different grinding tasks without needing to change tools.

Another great characteristic of the Harbor Freight Tools 94191 is the adjustable eye shields. These shields help protect users' eyes from debris while providing a clear view of their work. The adjustable nature of the shields allows users to position them at various angles, enhancing safety while ensuring visibility during operations.

Additionally, the bench grinder is designed with a built-in work light, which illuminates the workspace and improves visibility, especially in dim lighting conditions. This feature is particularly useful for users needing detailed work while ensuring they maintain consistency and accuracy.

The Harbor Freight Tools 94191 also integrates a maintenance-free design, making it easy to use without requiring extensive upkeep. The inclusion of rubber feet ensures stability during operation and helps absorb vibration, prolonging the tool's lifespan.

In summary, the Harbor Freight Tools 94191 6-Inch Bench Grinder is a powerful, user-friendly tool that combines various features and technologies tailored to meet the needs of any metalworking task. With its robust motor, dual-wheel setup, adjustable eye shields, built-in work light, and durable construction, this bench grinder is an excellent addition to any workshop, whether for professional or personal use.
Top Page Image Contents