Harbor Freight Tools 94191 warranty Fuel Tank CAP Fuel Filter

Page 18

squeeze thoroughly to dry. Then, squirt several drops of a light weight oil onto the Element. Use compressed air to clean the Air Filter Separator. Then replace the Air Filter Separator, Air Filter Element, and Air Filter Cover. Clean more often under dusty conditions or when airborne debris is present. Replace Air Filter parts if necessary. (See Figure H.)

c.After every 100 hours of use: Replace the Spark Plug (28A). To do so, remove the Spark Plug Wire (36A). Use the accessory Spark Plug Wrench Kit (86A) to remove the old Spark Plug. Install a new Spark Plug. Then, replace the Spark Plug Wire. (See Figure H.)

FUEL TANK CAP

FUEL FILTER

(32)

FUEL TANK

(31)

(34)

FIGURE I

d.Daily: Inspect the Fuel Filter (32): To do so, remove the Fuel Tank Cap (34). Remove the Fuel Filter from the Fuel Tank (31). If necessary, use compressed air to remove any dirt and debris from the Fuel Filter. Then replace the Fuel Filter and Fuel Tank Cap. (See Figure I.)

5.When storing the Generator, make sure to store the unit in a clean, dry, safe loca- tion out of reach of children and other unauthorized people.

6.CAUTION! All maintenance, service, or repairs not mentioned in this manual must only be performed by a qualified service technician.

SKU 94191

For technical questions, please call 1-800-444-3353.

Page 18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Your Warranty Is Voided If For technical questions or replacement parts, please callSave this Manual SpecificationsGeneral Safety Rules and Precautions Work AreaPersonal Safety Tool USE and CareSKU For technical questions, please call Specific Safety Rules and Precautions ServiceChemical Precautions Fire and Explosion PrecautionsMechanical Precautions Use only Engine manufacturer recommended fuel and oilNoise Precautions Electrical PrecautionsInsulate all connections and disconnected wires 120 or 240 Volt MISC. PrecautionsNameplate Extension Cord Length At full loadUnpacking Assembly InstructionsTo Install The Battery not included See Figure BInstallation Instructions General LocationSee Figure C Control Panel FeaturesGrounding The Generator See Figure DFigure D PRE-START Instructions To Add Engine OilOperating Instructions See Figure ESee Figure E To Fill The Fuel Tank To Start The Engine/Generator See Figure FTo Connect Electrical Loads Volts x Amps = Watts example 120 volts x 3 amps = 360 watts See Figure F SKU For technical questions, please callINSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipment Generator maintenanceEngine maintenance See Figure GFuel Tank CAP Fuel Filter Troubleshooting Please Read the Following Carefully Parts List Generator Assembly Diagram Generator Parts List Engine Part Description QtyAssembly Diagram Engine SKU 94191 For technical questions, please callLimited 1 year warranty Owner’s Warranty ResponsibilitiesLength of Coverage No Charge Repair or ReplacementService and Maintenance Consequential Damages CoverageElectrical Diagram

94191 specifications

Harbor Freight Tools is widely recognized for delivering high-quality tools at affordable prices, and one of the standout products in their lineup is the 94191 6-Inch Bench Grinder. This versatile tool is perfect for both DIY enthusiasts and seasoned professionals alike, providing a powerful solution for sharpening, grinding, and polishing tasks.

One of the main features of the Harbor Freight Tools 94191 is its robust 2.1 amp motor, which provides a reliable power source for various grinding applications. The motor allows the grinder to reach a maximum speed of 3,450 revolutions per minute (RPM), ensuring effective material removal and efficiency. This makes the tool ideal for sharpening blades, shaping metal, or removing rust and corrosion.

The 94191 model features a well-designed cast iron base that provides stability during operation. The vibration-free design contributes to more accurate grinding and enhances safety, reducing the risk of accidents. Additionally, the grinder comes equipped with two grinding wheels: a coarse wheel for quick material removal and a fine wheel for precision sharpening. The dual-wheel setup allows users to switch between different grinding tasks without needing to change tools.

Another great characteristic of the Harbor Freight Tools 94191 is the adjustable eye shields. These shields help protect users' eyes from debris while providing a clear view of their work. The adjustable nature of the shields allows users to position them at various angles, enhancing safety while ensuring visibility during operations.

Additionally, the bench grinder is designed with a built-in work light, which illuminates the workspace and improves visibility, especially in dim lighting conditions. This feature is particularly useful for users needing detailed work while ensuring they maintain consistency and accuracy.

The Harbor Freight Tools 94191 also integrates a maintenance-free design, making it easy to use without requiring extensive upkeep. The inclusion of rubber feet ensures stability during operation and helps absorb vibration, prolonging the tool's lifespan.

In summary, the Harbor Freight Tools 94191 6-Inch Bench Grinder is a powerful, user-friendly tool that combines various features and technologies tailored to meet the needs of any metalworking task. With its robust motor, dual-wheel setup, adjustable eye shields, built-in work light, and durable construction, this bench grinder is an excellent addition to any workshop, whether for professional or personal use.
Top Page Image Contents