Harbor Freight Tools 94191 warranty Personal Safety, Tool USE and Care

Page 3

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Provide barriers or shields as needed.

PERSONAL SAFETY

1.Stay alert. Watch what you are doing, and use common sense when operat- ing a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

3.Avoid accidental starting. Be sure the Engine Ignition (2) is in its “OFF” posi- tion before moving the Generator and before performing any service, mainte- nance, or cleaning procedures on the unit.

4.Remove adjusting keys or wrenches before turning the Generator on. A wrench or a key that is left attached to a rotating part of the machine may result in personal injury.

5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

6.Use safety equipment. Always wear eye protection. Always wear ANSI approved safety impact goggles when using this product. ANSI approved hearing protection must also be used.

TOOL USE AND CARE

1.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

2.Do not use the Generator if the Engine’s Ignition (2) does not turn it on or off. Any tool that cannot be controlled with its power switch is dangerous and must be replaced.

3.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

4.Maintain tools with care. Properly maintained tools are less likely to malfunction and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.

5.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

SKU 94191

For technical questions, please call 1-800-444-3353.

Page 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents For technical questions or replacement parts, please call Your Warranty Is Voided IfWork Area SpecificationsGeneral Safety Rules and Precautions Save this ManualPersonal Safety Tool USE and CareSKU For technical questions, please call Service Specific Safety Rules and PrecautionsUse only Engine manufacturer recommended fuel and oil Fire and Explosion PrecautionsMechanical Precautions Chemical PrecautionsNoise Precautions Electrical PrecautionsInsulate all connections and disconnected wires At full load MISC. PrecautionsNameplate Extension Cord Length 120 or 240 VoltSee Figure B Assembly InstructionsTo Install The Battery not included UnpackingGeneral Location Installation InstructionsSee Figure D Control Panel FeaturesGrounding The Generator See Figure CFigure D To Add Engine Oil PRE-START InstructionsOperating Instructions See Figure ESee Figure E To Fill The Fuel Tank To Start The Engine/Generator See Figure FTo Connect Electrical Loads See Figure F SKU For technical questions, please call Volts x Amps = Watts example 120 volts x 3 amps = 360 wattsDo not use damaged equipment Generator maintenance INSPECTION, MAINTENANCE, and CleaningSee Figure G Engine maintenanceFuel Tank CAP Fuel Filter Troubleshooting Please Read the Following Carefully Parts List Generator Assembly Diagram Generator Part Description Qty Parts List EngineSKU 94191 For technical questions, please call Assembly Diagram EngineOwner’s Warranty Responsibilities Limited 1 year warrantyConsequential Damages Coverage No Charge Repair or ReplacementService and Maintenance Length of CoverageElectrical Diagram

94191 specifications

Harbor Freight Tools is widely recognized for delivering high-quality tools at affordable prices, and one of the standout products in their lineup is the 94191 6-Inch Bench Grinder. This versatile tool is perfect for both DIY enthusiasts and seasoned professionals alike, providing a powerful solution for sharpening, grinding, and polishing tasks.

One of the main features of the Harbor Freight Tools 94191 is its robust 2.1 amp motor, which provides a reliable power source for various grinding applications. The motor allows the grinder to reach a maximum speed of 3,450 revolutions per minute (RPM), ensuring effective material removal and efficiency. This makes the tool ideal for sharpening blades, shaping metal, or removing rust and corrosion.

The 94191 model features a well-designed cast iron base that provides stability during operation. The vibration-free design contributes to more accurate grinding and enhances safety, reducing the risk of accidents. Additionally, the grinder comes equipped with two grinding wheels: a coarse wheel for quick material removal and a fine wheel for precision sharpening. The dual-wheel setup allows users to switch between different grinding tasks without needing to change tools.

Another great characteristic of the Harbor Freight Tools 94191 is the adjustable eye shields. These shields help protect users' eyes from debris while providing a clear view of their work. The adjustable nature of the shields allows users to position them at various angles, enhancing safety while ensuring visibility during operations.

Additionally, the bench grinder is designed with a built-in work light, which illuminates the workspace and improves visibility, especially in dim lighting conditions. This feature is particularly useful for users needing detailed work while ensuring they maintain consistency and accuracy.

The Harbor Freight Tools 94191 also integrates a maintenance-free design, making it easy to use without requiring extensive upkeep. The inclusion of rubber feet ensures stability during operation and helps absorb vibration, prolonging the tool's lifespan.

In summary, the Harbor Freight Tools 94191 6-Inch Bench Grinder is a powerful, user-friendly tool that combines various features and technologies tailored to meet the needs of any metalworking task. With its robust motor, dual-wheel setup, adjustable eye shields, built-in work light, and durable construction, this bench grinder is an excellent addition to any workshop, whether for professional or personal use.
Top Page Image Contents