Harbor Freight Tools 56088 warranty Installation Instructions, General Location

Page 10

4.Connect the end of the Positive Battery Cable (63) to the Battery’s positive (+) ter- minal. Then connect the Negative Battery Cable (64) to the Battery’s negative (–)terminal. (See Figure A.)

INSTALLATION INSTRUCTIONS

1.Electrical and other permits may be required for the installation of emergency or portable power systems. Investigate the local building and electrical codes before installing this unit.

2.Prior to providing Generator power to tools and equipment, make sure the Gen- erator’s rated voltage, wattage, and amperage capacity is adequate to supply all electrical loads the unit will power. If powering exceeds the Generator’s capacity, it may be necessary to group one or more of the tools/equipment for connection to a separate Generator.

General Location:

1.It is recommended to locate the Generator (outdoors only) where cooling air is readily available. Locate the Generator so that the air inlets and outlets are not blocked by obstructions such as bushes, trees, or snow drifts. Locating it in the path of heavy winds or snowdrifts may require the placement of a barrier for protection. The air inlet (on Air Filter Cover 18a), in normal weather conditions, should face the prevailing wind direction.

2.Locate the Generator on a concrete slab or other area where rain drainage or flood waters can not reach it.

3.Generator placement should allow four feet of access to all sides for maintenance and for proper air cooling.

4.Place the Generator as close as possible to the electrical tools and equipment be- ing powered to reduce the length of extension cords.

SKU 56088

For technical questions, please call 1-800-444-3353.

Page 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Your Warranty Is Voided If For technical questions or replacement parts, please callSave this Manual SpecificationsGeneral Safety Rules and Precautions Work AreaPersonal Safety Tool USE and CareAC Applications Specific Safety Rules and Precautions ServiceChemical Precautions Fire and Explosion PrecautionsMechanical Precautions Use only Engine manufacturer recommended fuel and oilElectrical Precautions Noise PrecautionInsulate all connections and disconnected wires 120 or 240 Volt MISC. PrecautionsNameplate Extension Cord Length At full loadUnpacking Assembly InstructionsTo Install The Battery not included See Figure aInstallation Instructions General LocationControl Panel Features Figure C PRE-START Instructions To Add Engine OilSee Figure D To Fill The Fuel Tank This Unit can Power the Following ItemsSee Figure D Operating Instructions To Start The Engine/GeneratorTo Connect Electrical Loads See Figure EVolts x Amps = Watts example 120 volts x 3 amps = 360 watts INSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipment Generator maintenanceEngine maintenance Figure FFuel Tank CAP Fuel Filter Troubleshooting Please Read the Following Carefully Parts List Generator Part Description QtyAssembly Diagram Generator Parts List Engine Assembly Diagram Engine Limited 1 year warranty Owner’s Warranty ResponsibilitiesLength of Coverage No Charge Repair or ReplacementService and Maintenance Consequential Damages CoverageElectrical Diagram

56088 specifications

Harbor Freight Tools 56088 is a versatile and cost-effective solution for those in need of reliable hand tools. Renowned for its focus on affordability without sacrificing quality, this product is a prime example of the brand’s commitment to delivering exceptional value.

One of the standout features of the Harbor Freight Tools 56088 is its robust construction. The tool is designed to withstand rigorous use and is made from high-quality materials, ensuring durability and longevity. This makes it an ideal choice for both DIY enthusiasts and professional users who require tools that can handle tough jobs day in and day out.

The 56088 model is equipped with a range of ergonomic features that enhance user comfort and reduce fatigue during prolonged use. Its non-slip grip handle provides stability and control, allowing users to exert maximum force without compromising safety. This is particularly beneficial when performing tasks that require precision.

Another key characteristic of the Harbor Freight Tools 56088 is its ease of use. The design incorporates intuitive features that make it user-friendly, even for those who may be new to hand tools. Instructions are straightforward, and the tool’s functionality is clear, making it accessible to a wide range of users.

In terms of technology, the Harbor Freight Tools 56088 is equipped with innovations that enhance its performance. Precision engineering ensures that the tool operates efficiently, delivering results that meet or exceed user expectations. Additionally, the design incorporates features that promote safety, such as mechanisms to prevent accidental disengagement during use.

The versatility of the Harbor Freight Tools 56088 cannot be understated. It is suitable for various applications, from simple household repairs to more complex tasks. This adaptability makes it a valuable addition to any toolbox, providing users with numerous possibilities for tackling different projects.

Overall, the Harbor Freight Tools 56088 represents a perfect blend of quality, comfort, safety, and versatility. It is crafted for both the seasoned tradesperson and the casual DIYer, ensuring that everyone can achieve professional results with a tool that is both accessible and efficient. With its robust construction and user-focused design, the 56088 is a reliable choice in the realm of hand tools.
Top Page Image Contents