Harbor Freight Tools 56088 warranty This Unit can Power the Following Items, See Figure D

Page 14

If the Engine will be run in temperatures below 32 degrees Fahrenheit, use SAE 5W-30weight oil. (See Figure D, prior page.)

3.To do so, unscrew and remove the Oil Dipstick (65A). Pour engine oil into the oil fill hole until the level of oil is even with the bottom edge of the oil fill hole (if you cannot see the oil through the oil fill hole, then the oil is too low and more oil must be added). (See Figure D.)

4.Make sure to screw the Oil Dipstick (65A) firmly back into its Dipstick Hole.

(See Figure D.)

To Fill The Fuel Tank:

1.Prior to first using the Generator, the Fuel Tank (31) must be filled with high octane unleaded gasoline. (See Figure D.)

2.To do so, remove the Fuel Tank Cap (34) and fill the Fuel Tank (31) with unleaded gasoline. Then, replace the Fuel Tank Cap. Thereafter, check the Fuel Gauge (35) for the amount of unleaded gasoline. When necessary, refill the Fuel Tank.

(See Figure D.)

NOTE: Periodically, make sure to check the Fuel Filter (32) for excessive dirt and debris. If necessary, remove the Fuel Filter and clean with compressed air.

(See Figure D.)

THIS UNIT CAN POWER THE FOLLOWING ITEMS

ITEM

RUNNING

START-UP

 

WATTS

WATTS

1 HP Air Compressor

1600

4500

Belt Sander

1200

2400

Pressure Washer

1200

3600

Refrigerator/Freezer

700

2200

1/2 HP Sump Pump

1050

2150

1/2 HP Well Pump

1000

2100

Miter Saw

1650

3000

1-1/2 HP Capacitor Start &

1400

3100

Run Motor

 

 

Central AC-32, 000 BTU

5000

6500

10” Table Saw

1800

4500

NOTE: Wattages listed above are estimates. Check nameplate wattages on all loads before connecting to Generator.

SKU 56088

For technical questions, please call 1-800-444-3353.

Page 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Your Warranty Is Voided If For technical questions or replacement parts, please callSave this Manual SpecificationsGeneral Safety Rules and Precautions Work AreaPersonal Safety Tool USE and CareAC Applications Specific Safety Rules and Precautions ServiceChemical Precautions Fire and Explosion PrecautionsMechanical Precautions Use only Engine manufacturer recommended fuel and oilInsulate all connections and disconnected wires Noise PrecautionElectrical Precautions 120 or 240 Volt MISC. PrecautionsNameplate Extension Cord Length At full loadUnpacking Assembly InstructionsTo Install The Battery not included See Figure aInstallation Instructions General LocationControl Panel Features Figure C PRE-START Instructions To Add Engine OilSee Figure D This Unit can Power the Following ItemsSee Figure D To Fill The Fuel Tank Operating Instructions To Start The Engine/GeneratorVolts x Amps = Watts example 120 volts x 3 amps = 360 watts See Figure ETo Connect Electrical Loads INSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipment Generator maintenanceEngine maintenance Figure FFuel Tank CAP Fuel Filter Troubleshooting Please Read the Following Carefully Parts List Generator Part Description QtyAssembly Diagram Generator Parts List Engine Assembly Diagram Engine Limited 1 year warranty Owner’s Warranty ResponsibilitiesLength of Coverage No Charge Repair or ReplacementService and Maintenance Consequential Damages CoverageElectrical Diagram

56088 specifications

Harbor Freight Tools 56088 is a versatile and cost-effective solution for those in need of reliable hand tools. Renowned for its focus on affordability without sacrificing quality, this product is a prime example of the brand’s commitment to delivering exceptional value.

One of the standout features of the Harbor Freight Tools 56088 is its robust construction. The tool is designed to withstand rigorous use and is made from high-quality materials, ensuring durability and longevity. This makes it an ideal choice for both DIY enthusiasts and professional users who require tools that can handle tough jobs day in and day out.

The 56088 model is equipped with a range of ergonomic features that enhance user comfort and reduce fatigue during prolonged use. Its non-slip grip handle provides stability and control, allowing users to exert maximum force without compromising safety. This is particularly beneficial when performing tasks that require precision.

Another key characteristic of the Harbor Freight Tools 56088 is its ease of use. The design incorporates intuitive features that make it user-friendly, even for those who may be new to hand tools. Instructions are straightforward, and the tool’s functionality is clear, making it accessible to a wide range of users.

In terms of technology, the Harbor Freight Tools 56088 is equipped with innovations that enhance its performance. Precision engineering ensures that the tool operates efficiently, delivering results that meet or exceed user expectations. Additionally, the design incorporates features that promote safety, such as mechanisms to prevent accidental disengagement during use.

The versatility of the Harbor Freight Tools 56088 cannot be understated. It is suitable for various applications, from simple household repairs to more complex tasks. This adaptability makes it a valuable addition to any toolbox, providing users with numerous possibilities for tackling different projects.

Overall, the Harbor Freight Tools 56088 represents a perfect blend of quality, comfort, safety, and versatility. It is crafted for both the seasoned tradesperson and the casual DIYer, ensuring that everyone can achieve professional results with a tool that is both accessible and efficient. With its robust construction and user-focused design, the 56088 is a reliable choice in the realm of hand tools.
Top Page Image Contents