Harbor Freight Tools 56088 warranty Operating Instructions, To Start The Engine/Generator

Page 15

OPERATING INSTRUCTIONS

1.Check to make sure the Engine Ignition (2) is in its “OFF” position.

(See Figure C.)

2.CAUTION! Make sure to unplug any load from the Generator before starting to prevent permanent damage to any appliances, tools, or equipment.

3.CAUTION! Engine oil MUST be added to the Engine’s crankcase prior to start- ing and running the Engine. Failure to add oil will damage the Engine and void its warranty. (See pages 13 and 14, and Figure D.)

4.Before the first use, the Fuel Tank (31) must be filled with a high octane, unleaded gasoline. (See pages 13 and 14, and Figure D.)

a.WARNING! Never fill the Fuel Tank (31) completely. Fill the Fuel Tank to 1/2” below the bottom of the filler neck to provide space for fuel expansion. Wipe any fuel spills from the Engine and Generator before starting the Engine.

b.WARNING! Never fill the Fuel Tank (31) when the Engine is running or hot. Do not smoke when filling the Fuel Tank.

To Start The Engine/Generator:

ON

OFF

FUEL VALVE

 

 

 

 

CHOKE LEVER (21A)

CHOKE LEVER (21A)

(41)

(IN “CHOKE” POSITION)

(IN “RUN” POSITION)

FIGURE E

1.Turn the Engine Fuel Valve (41) to its “OPEN” position. Then, turn the Engine Choke Lever (21A) to its “CHOKE” position. NOTE: No choke is required if the Engine is warm. Make sure the Engine Choke Lever is in the “RUN” position when starting a warm Engine. (See Figure E.)

2.To start the Engine, using the Battery (45) for cranking power, insert the Ignition Key (65) and turn the Engine Ignition (2) to its “START” position. NOTE: To prolong starter life, use short starting cycles (5 seconds maximum, then wait one minute before attempting to again start). (See Figure C.)

SKU 56088

For technical questions, please call 1-800-444-3353.

Page 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents For technical questions or replacement parts, please call Your Warranty Is Voided IfWork Area SpecificationsGeneral Safety Rules and Precautions Save this ManualTool USE and Care Personal SafetyAC Applications Service Specific Safety Rules and PrecautionsUse only Engine manufacturer recommended fuel and oil Fire and Explosion PrecautionsMechanical Precautions Chemical PrecautionsNoise Precaution Electrical PrecautionsInsulate all connections and disconnected wires At full load MISC. PrecautionsNameplate Extension Cord Length 120 or 240 VoltSee Figure a Assembly InstructionsTo Install The Battery not included UnpackingGeneral Location Installation InstructionsControl Panel Features Figure C To Add Engine Oil PRE-START InstructionsThis Unit can Power the Following Items See Figure D To Fill The Fuel TankSee Figure D To Start The Engine/Generator Operating InstructionsSee Figure E To Connect Electrical LoadsVolts x Amps = Watts example 120 volts x 3 amps = 360 watts Do not use damaged equipment Generator maintenance INSPECTION, MAINTENANCE, and CleaningFigure F Engine maintenanceFuel Tank CAP Fuel Filter Troubleshooting Please Read the Following Carefully Part Description Qty Parts List GeneratorAssembly Diagram Generator Parts List Engine Assembly Diagram Engine Owner’s Warranty Responsibilities Limited 1 year warrantyConsequential Damages Coverage No Charge Repair or ReplacementService and Maintenance Length of CoverageElectrical Diagram

56088 specifications

Harbor Freight Tools 56088 is a versatile and cost-effective solution for those in need of reliable hand tools. Renowned for its focus on affordability without sacrificing quality, this product is a prime example of the brand’s commitment to delivering exceptional value.

One of the standout features of the Harbor Freight Tools 56088 is its robust construction. The tool is designed to withstand rigorous use and is made from high-quality materials, ensuring durability and longevity. This makes it an ideal choice for both DIY enthusiasts and professional users who require tools that can handle tough jobs day in and day out.

The 56088 model is equipped with a range of ergonomic features that enhance user comfort and reduce fatigue during prolonged use. Its non-slip grip handle provides stability and control, allowing users to exert maximum force without compromising safety. This is particularly beneficial when performing tasks that require precision.

Another key characteristic of the Harbor Freight Tools 56088 is its ease of use. The design incorporates intuitive features that make it user-friendly, even for those who may be new to hand tools. Instructions are straightforward, and the tool’s functionality is clear, making it accessible to a wide range of users.

In terms of technology, the Harbor Freight Tools 56088 is equipped with innovations that enhance its performance. Precision engineering ensures that the tool operates efficiently, delivering results that meet or exceed user expectations. Additionally, the design incorporates features that promote safety, such as mechanisms to prevent accidental disengagement during use.

The versatility of the Harbor Freight Tools 56088 cannot be understated. It is suitable for various applications, from simple household repairs to more complex tasks. This adaptability makes it a valuable addition to any toolbox, providing users with numerous possibilities for tackling different projects.

Overall, the Harbor Freight Tools 56088 represents a perfect blend of quality, comfort, safety, and versatility. It is crafted for both the seasoned tradesperson and the casual DIYer, ensuring that everyone can achieve professional results with a tool that is both accessible and efficient. With its robust construction and user-focused design, the 56088 is a reliable choice in the realm of hand tools.
Top Page Image Contents