Harbor Freight Tools 56088 warranty AC Applications

Page 4

6.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

7.CAUTION: This generator is not intended to power sensitive electronic equip- ment* without the addition of an appropriate line conditioner and surge pro- tector (both not included). Sensitive electronic equipment should be operated on approved inverter type generators or pure sine wave generators.

If the plugged in product operates abnormally or unusually slow, immediately stop using the generator as a power source. Always read and adhere to the instruction manual of the product to be powered, to make sure that it can be safely and efficiently powered by a portable generator.

Note: When using a generator to provide home standby electricity, a transfer switch (sold separately) is needed to prevent back feeding power into the utility line.

Connections for standby power to a building electrical system must be made by a qualified electrician. The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes.

WARNING: Improper connections to a building electrical system can allow electrical current from the generator to backfeed into the utility lines. Such backfeed may electrocute utility company workers or others who contact the lines during a power outage, and the generator may explode, burn, or cause fires when utility power is restored. Consult the utility company or a qualified electrician.

*Sensitive electronic equipment includes, but is not limited to, audio/video equipment, some television sets, computers, and printers.

AC APPLICATIONS

1.Before connecting an appliance or power cord to the generator: Make sure that it is in good working order. Faulty appliances or power cords can create a potential for electrical shock.

2.If an appliance begins to operate abnormally, becomes sluggish or stops suddenly, turn it off immediately. Disconnect the appliance, and determine whether the problem is the appliance, or if the rated load capacity of the generator has been exceeded.

3.Make sure that the electrical rating of the tool or appliance does not exceed that of the generator. Never exceed the maximum power rating of the generator. Power levels between rated and maximum may be used for no more than 30 minutes.

4.Substantial overloading will open the circuit breaker. Exceeding the time limit for maximum power operation or slightly overloading the generator may not switch the circuit breaker or circuit protector OFF, but will shorten the service life of the generator.

SKU 56088

For technical questions, please call 1-800-444-3353.

Page 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Your Warranty Is Voided If For technical questions or replacement parts, please callSpecifications General Safety Rules and PrecautionsSave this Manual Work AreaPersonal Safety Tool USE and CareAC Applications Specific Safety Rules and Precautions ServiceFire and Explosion Precautions Mechanical PrecautionsChemical Precautions Use only Engine manufacturer recommended fuel and oilElectrical Precautions Noise PrecautionInsulate all connections and disconnected wires MISC. Precautions Nameplate Extension Cord Length120 or 240 Volt At full loadAssembly Instructions To Install The Battery not includedUnpacking See Figure aInstallation Instructions General LocationControl Panel Features Figure C PRE-START Instructions To Add Engine OilSee Figure D To Fill The Fuel Tank This Unit can Power the Following ItemsSee Figure D Operating Instructions To Start The Engine/GeneratorTo Connect Electrical Loads See Figure EVolts x Amps = Watts example 120 volts x 3 amps = 360 watts INSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipment Generator maintenanceEngine maintenance Figure FFuel Tank CAP Fuel Filter Troubleshooting Please Read the Following Carefully Parts List Generator Part Description QtyAssembly Diagram Generator Parts List Engine Assembly Diagram Engine Limited 1 year warranty Owner’s Warranty ResponsibilitiesNo Charge Repair or Replacement Service and MaintenanceLength of Coverage Consequential Damages CoverageElectrical Diagram

56088 specifications

Harbor Freight Tools 56088 is a versatile and cost-effective solution for those in need of reliable hand tools. Renowned for its focus on affordability without sacrificing quality, this product is a prime example of the brand’s commitment to delivering exceptional value.

One of the standout features of the Harbor Freight Tools 56088 is its robust construction. The tool is designed to withstand rigorous use and is made from high-quality materials, ensuring durability and longevity. This makes it an ideal choice for both DIY enthusiasts and professional users who require tools that can handle tough jobs day in and day out.

The 56088 model is equipped with a range of ergonomic features that enhance user comfort and reduce fatigue during prolonged use. Its non-slip grip handle provides stability and control, allowing users to exert maximum force without compromising safety. This is particularly beneficial when performing tasks that require precision.

Another key characteristic of the Harbor Freight Tools 56088 is its ease of use. The design incorporates intuitive features that make it user-friendly, even for those who may be new to hand tools. Instructions are straightforward, and the tool’s functionality is clear, making it accessible to a wide range of users.

In terms of technology, the Harbor Freight Tools 56088 is equipped with innovations that enhance its performance. Precision engineering ensures that the tool operates efficiently, delivering results that meet or exceed user expectations. Additionally, the design incorporates features that promote safety, such as mechanisms to prevent accidental disengagement during use.

The versatility of the Harbor Freight Tools 56088 cannot be understated. It is suitable for various applications, from simple household repairs to more complex tasks. This adaptability makes it a valuable addition to any toolbox, providing users with numerous possibilities for tackling different projects.

Overall, the Harbor Freight Tools 56088 represents a perfect blend of quality, comfort, safety, and versatility. It is crafted for both the seasoned tradesperson and the casual DIYer, ensuring that everyone can achieve professional results with a tool that is both accessible and efficient. With its robust construction and user-focused design, the 56088 is a reliable choice in the realm of hand tools.
Top Page Image Contents