Great Dane GSKH2352S, GSKW1948S, GSKW2352S Product Identification, Introduction, Special Messages

Page 3

WARNING: The Engine Exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

California Proposition 65 Warning

All information, illustrations and

specifications in this manual are based on

the latest information at the time of

publication. The right is reserved to make

changes at any time without notice.

COPYRIGHT© 2007

Auburn Consolidated Industries, Inc.

All rights reserved Previous Editions COPYRIGHT© 2002

Introduction

Using Your Operator’s Manual

This manual is an important part of your machine and should remain with the machine when you sell it.

Use the safety and operating information in the machine operator’s manual to operate and service the machine safely and correctly.

An engine manufacturer’s owner’s manual has been provided with your machine. This will provide maintenance and troubleshooting information for the engine installed in your machine.

Specifications and design are subject to change without notice.

Special Messages

Your manual contains special messages to bring attention to potential safety concerns, machine damage as well as helpful operating and servicing information. Please read all the information carefully to avoid injury and machine damage.

c

CAUTION: Avoid injury! This symbol and text highlight potential hazards or death to the operator or bystanders that may occur if the hazards or procedures are ignored.

IMPORTANT: Avoid Damage! This text is used to tell the operator of actions or conditions that might result in damage to the machine.

NOTE: General information is given throughout the manual that may help the operator in the operation or service of the machine.

Product Identification

Record Identification Numbers

Super Surfer

GSKH18-48S Serial Number (636510001-)

GSKH23-52S Serial Number (636610001-)

GSKH25-61S Serial Number (636710001-)

GSKW1948S Serial Number (636410001-)

GSKW2352S Serial Number (637010001-)

GSKA1948S Serial Number (6373010001-)

If you need to contact an Authorized Service Center for information on servicing, always provide the product model and serial numbers.

You will need to locate the model and serial numbers for the machine and for the engine of your machine and record the information in the spaces provided.

DATE OF PURCHASE:

_________________________________________

DEALER NAME:

_________________________________________

DEALER PHONE:

_________________________________________

PRODUCT IDENTIFICATION NUMBER: Model Number

_________________________________________

Serial Number

_________________________________________

Page 2 Page 4
Image 3
Page 2 Page 4
Contents OPERATOR’S Manual Page Record Identification Numbers Product IdentificationIntroduction Special MessagesSafety Labels Understanding The Machine Safety LabelsSafety Labels Safety SafetyParking Safely Using a Spark ArrestorRotating Blades are Dangerous Checking Mowing AreaAvoid High Pressure Fluids Protect ChildrenAvoid Tipping Keep Riders OffHandling Fuel Safely Maintenance and StorageTire Safety Prevent FiresOperator Station Controls Daily Operating ChecklistOperating Avoid Damage to Plastic and Painted SurfacesMounting and Dismounting Machine Safely Adjusting Mower Deck Cutting HeightMower Deck Controls Miscellaneous ControlsAdjusting Level Side-to-Side Leveling Mower DeckChecking Level Side-to-Side Checking Level Front-to-Rear Checking and Adjusting Cutting HeightTesting Neutral Switch Start Adjusting Mower Deck Anti-Scalp WheelsTesting PTO Switch Testing Park Brake SwitchEngage PTO Testing the Park BrakeUsing the PTO Testing Operator Presence SwitchUsing the Throttle Using the HourmeterUsing the Motion Control Levers Gentle Right Turn ForwardReverse Gentle Left TurnStarting Engine Engaging MowerStopping the Engine Mowing Travel Speeds Using Pump Free-Wheel ValvesTransporting Machine on a Trailer Mowing TipsService Intervals Service IntervalsService Lubrication Service Engine Changing Engine Oil and Filter Checking Engine Oil LevelReplacing Fuel Filter Cleaning Engine Air Intake Screen and FanChecking Hydraulic Oil Level Service TransmissionService Transmission Hydraulic OilChecking Traction Drive Belt Cleaning Hydraulic Oil Pump Cooling FinsChecking and Replacing Pump Traction Drive Belt Removing Traction Drive BeltPicture Note Traction drive belt idler pulley bottom view Installing Traction Drive BeltChecking and Adjusting Motion Control Linkages Checking Motion Control LinkagesAdjusting Forward and Reverse Speeds Checking and Adjusting Transmission TrackingAdjusting Park Brake Service Steering & BrakesAdjust Neutral Switch Service Steering & BrakesService Mower Service MowerInstalling Mower Deck Drive Belt Checking for Bent Mower BladesReplace blades if defective. Never straighten or weld them Checking and Replacing Mower Blades Sharpening BladesReplacing Mower Blades Balancing Blades Service ElectricalService Electrical Service the Battery SafelyChecking the Battery Sealed Batteries Removing and Installing BatteryUsing Booster Battery Replacing Fuse Service MiscellaneousService Miscellaneous Using Proper FuelRemoving and Installing Rear Drive Wheels Removing and Installing Front Caster WheelsTightening Rear Drive Wheel Hardware Tire Size Pressure Cleaning and Repairing Plastic SurfacesChecking Tire Pressure Servicing Caster Wheel Roller BearingsUsing Troubleshooting Chart TroubleshootingTroubleshooting Cleaning and Repairing Metal SurfacesSteering Electrical SystemMachine Park BrakeStorage StorageCheck Hydraulic Oil Level AssemblyAssembly Removing Machine From StorageSpecifications SpecificationsGetting Quality Service Getting Quality ServiceWiring Schematics Service Miscellaneous Kawasaki Wiring Schematics Service MiscellaneousHydraulic Schematics Service Miscellaneous 816 Main FRAME, Traction DECK, Console and OPC PlatformRef. No Description Qty Remarks Drive Controls and Linkage Included with new Hydrostatic Pump Park Brake Park Brake Hydrostatic Pump Drive and PTO Hydrostatic Pump Drive and PTO Hydrostatic Components Hydrostatic Components Hydraulic Schematic Left Hydrostatic Pump AssemblyPump Block Platform Components Fuel Tank and Lines Fuel Tank and Lines Kohler Engine and Related Components X6PMTX-S Kawasaki Engine and Related Components Kawasaki Engine and Related Components MX20146 Kohler Logic Schematic Kohler Logic SchematicKawasaki Logic BATTERY, Electrical Harness and Components Ref. No Description Qty Remarks Caster Wheels and Rear Wheels Caster Wheels and Rear Wheels Mower Deck Lift Linkage Mower Deck Lift Linkage 1011 295 Mower DeckChcs Mower Deck Spindles Mower Deck Spindles 2021 Labels and DecalsLabels and Decals

GSKH2561S, GSKH2352S, GSKH1848S, GSKW2352S, GSKW1948S specifications

Great Dane has established itself as a leader in the manufacturing of high-quality trailers, and models like the GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, and GSKH2561S showcase the company's commitment to innovation and durability. These models are designed to meet the evolving needs of the transportation industry, offering a blend of advanced technology, superior materials, and customizable features.

The GSKW1948S and GSKW2352S are known for their enhanced weight distribution and aerodynamics. Equipped with lightweight materials, these models help increase payload capacity while ensuring fuel efficiency. The aerodynamic design minimizes drag, ultimately leading to reduced fuel consumption, which is a significant cost-saving advantage for fleet operators.

In contrast, the GSKH1848S, GSKH2352S, and GSKH2561S are tailored for heavier loads while maintaining structural integrity and safety. These models utilize high-strength steel and advanced welding techniques to ensure they withstand the rigors of long-haul transportation. Additionally, these trailers have a robust suspension system that provides a smooth ride, reducing wear and tear on both the vehicle and the cargo.

All five models come equipped with state-of-the-art technology, featuring telematics systems that allow for real-time monitoring of trailer performance and location. This feature enables fleet managers to optimize routes and improve operational efficiency. Moreover, each model boasts easy access points for maintenance, aiding in reducing downtime and overall operating costs.

Great Dane trailers also prioritize safety with features like anti-lock braking systems and enhanced visibility lighting. The design not only meets but often exceeds industry standards for safety, providing peace of mind to operators who need to transport goods across long distances.

In conclusion, the GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, and GSKH2561S models reflect Great Dane’s commitment to quality and innovation. With their combination of lightweight design, advanced technology, and safety features, these trailers offer reliable solutions for businesses seeking to optimize their logistics and transportation services. Investing in a Great Dane trailer means investing in efficiency, safety, and durability.
Top Page Image Contents