Great Dane GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, GSKH2561S manual Specifications

Page 40

SPECIFICATIONS

Connect Battery

c

CAUTION: Avoid injury! Prevent Battery Explosions:

•Keep sparks, lighted matches, and open flame away from the top of battery. Battery gas can explode.

•Never check battery charge by placing a metal object across the posts. Use a volt-meter or hydrometer.

•Do not charge a frozen battery; it may explode. Warm battery to 16 degrees C (60 degrees F).

1.Connect positive (red) cable to battery positive (+) terminal. Install red terminal cover (A).

2.Connect negative (black) cable to battery negative (-) terminal. Install black terminal cover (B).

Check Mower Deck Level

The mower deck is assembled and adjusted at the factory. After machine is completely assembled, check the mower front-to-rear and side-to-side deck level.

Check Machine Safety Systems

Perform safety system check to make sure the electronic safety interlock circuit is functioning properly.

Specifications

Engine

Note: See engine manufacturer’s owner’s manual provided with your machine for engine specifications.

Drivetrain

Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Dual Hydrostatic

Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydro-Gear BDP-10A

Wheel Motors . . . . . . . . . . . . . . . . . . . . . . . . . . Hydro-Gear HGD-12-1792

Number of Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Infinitely Variable

Electrical System

Charging System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Amp Ignition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flywheel

Starter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solenoid Shift

Fuel System

Fuel Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gasoline, Regular Unleaded Fuel Tank Location. . . . . . . . . . . . . . . . . . . . . . . On Right Side of Operator Fuel Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.7 L (6.0 gal)

Steering and Brakes

Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Dual Control Levers

Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic

Park Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tire Contact

Tires

Rear (Model 647). . . . . . . . . . . . . . . . . . . . . . . . 20 x 8-8 (with 48 in. deck) Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 x 5-6 Rear (Models 657, 667) . . . . . . . . . .20 x 10-8 (with 54 in. and 60 in. deck) Inflation Rear (Maximum) . . . . . . . . . . . . . . . . . . 69–97 kPa (10–14 psi) Inflation Front (Maximum) . . . . . . . . . . . . . . . . . .110–138 kPa (16–20 psi)

Battery

Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-volt CCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340-amp Reserve Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 minutes BCI Group Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U1L

Capacities

Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.7 L (6 gal) Hydraulic Oil (With Filter). . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 L (3.3 qt) Engine Oil (With Filter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9 L (2.0 qt)

Travel Speeds at Full Engine RPM

Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0–14.8 km/h (0–9.2 mph) Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0–6.4 km/h (0–4 mph)

Dimensions

Wheel Base

. . 1.32 m (52 in.)

Overall Height

. . 1.14 m (45 in.)

Overall Length (Model 647)

. 1.6 m (65.5 in.)

Overall Length (Model 657 and Model 667)

. 1.7 m (68.5 in.)

Overall Width (48 inch deck with chute up)

1.36 m (53.5 in.)

Overall Width (48 inch deck with chute down)

. . 1.57 m (62 in.)

Overall Width (54 inch deck with chute up)

1.46 m (57.5 in.)

Overall Width (54 inch deck with chute down)

. . 1.73 m (68 in.)

Overall Width (60 inch deck with chute up)

1.61 m (63.5 in.)

Overall Width (60 inch deck with chute down)

. . 1.88 m (74 in.)

Recommended Lubricants

Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . See Applicable Engine Manual

Hydraulic Oil . . . . . . . . . . . . . . . . . . . . 5W-50 or 15W-50 All Synthetic Oil

Grease: (This may change for high-speed applications such as cutting units)

. . . . . . . . . . . . . . . . All-Purpose Grease with an NLGI Grade No. 2 Rating

(Specifications and design subject to change without notice.)

Specifications - 38

Page 39 Page 41
Image 40
Page 39 Page 41
Contents OPERATOR’S Manual Page Product Identification IntroductionSpecial Messages Record Identification NumbersUnderstanding The Machine Safety Labels Safety LabelsSafety Labels Safety SafetyUsing a Spark Arrestor Rotating Blades are DangerousChecking Mowing Area Parking SafelyProtect Children Avoid TippingKeep Riders Off Avoid High Pressure FluidsMaintenance and Storage Tire SafetyPrevent Fires Handling Fuel SafelyDaily Operating Checklist OperatingAvoid Damage to Plastic and Painted Surfaces Operator Station ControlsAdjusting Mower Deck Cutting Height Mower Deck ControlsMiscellaneous Controls Mounting and Dismounting Machine SafelyLeveling Mower Deck Adjusting Level Side-to-SideChecking Level Side-to-Side Checking and Adjusting Cutting Height Checking Level Front-to-RearAdjusting Mower Deck Anti-Scalp Wheels Testing PTO SwitchTesting Park Brake Switch Testing Neutral Switch StartTesting the Park Brake Using the PTOTesting Operator Presence Switch Engage PTOUsing the Hourmeter Using the ThrottleUsing the Motion Control Levers Forward ReverseGentle Left Turn Gentle Right TurnEngaging Mower Starting EngineStopping the Engine Using Pump Free-Wheel Valves Transporting Machine on a TrailerMowing Tips Mowing Travel SpeedsService Intervals Service IntervalsService Lubrication Service Engine Checking Engine Oil Level Changing Engine Oil and FilterCleaning Engine Air Intake Screen and Fan Replacing Fuel FilterService Transmission Service TransmissionHydraulic Oil Checking Hydraulic Oil LevelCleaning Hydraulic Oil Pump Cooling Fins Checking and Replacing Pump Traction Drive BeltRemoving Traction Drive Belt Checking Traction Drive BeltInstalling Traction Drive Belt Checking and Adjusting Motion Control LinkagesChecking Motion Control Linkages Picture Note Traction drive belt idler pulley bottom viewChecking and Adjusting Transmission Tracking Adjusting Forward and Reverse SpeedsService Steering & Brakes Adjust Neutral SwitchService Steering & Brakes Adjusting Park BrakeService Mower Service MowerChecking for Bent Mower Blades Installing Mower Deck Drive BeltReplace blades if defective. Never straighten or weld them Sharpening Blades Checking and Replacing Mower BladesReplacing Mower Blades Service Electrical Service ElectricalService the Battery Safely Balancing BladesRemoving and Installing Battery Checking the Battery Sealed BatteriesUsing Booster Battery Service Miscellaneous Service MiscellaneousUsing Proper Fuel Replacing FuseRemoving and Installing Front Caster Wheels Removing and Installing Rear Drive WheelsTightening Rear Drive Wheel Hardware Cleaning and Repairing Plastic Surfaces Checking Tire PressureServicing Caster Wheel Roller Bearings Tire Size PressureTroubleshooting TroubleshootingCleaning and Repairing Metal Surfaces Using Troubleshooting ChartElectrical System MachinePark Brake SteeringStorage StorageAssembly AssemblyRemoving Machine From Storage Check Hydraulic Oil LevelSpecifications SpecificationsGetting Quality Service Getting Quality ServiceWiring Schematics Service Miscellaneous Service Miscellaneous Kawasaki Wiring SchematicsHydraulic Schematics Service Miscellaneous Main FRAME, Traction DECK, Console and OPC Platform 816Ref. No Description Qty Remarks Drive Controls and Linkage Included with new Hydrostatic Pump Park Brake Park Brake Hydrostatic Pump Drive and PTO Hydrostatic Pump Drive and PTO Hydrostatic Components Hydrostatic Components Left Hydrostatic Pump Assembly Hydraulic SchematicPump Block Platform Components Fuel Tank and Lines Fuel Tank and Lines Kohler Engine and Related Components X6PMTX-S Kawasaki Engine and Related Components Kawasaki Engine and Related Components Kohler Logic Schematic MX20146 Kohler Logic SchematicKawasaki Logic BATTERY, Electrical Harness and Components Ref. No Description Qty Remarks Caster Wheels and Rear Wheels Caster Wheels and Rear Wheels Mower Deck Lift Linkage Mower Deck Lift Linkage Mower Deck 1011 295Chcs Mower Deck Spindles Mower Deck Spindles Labels and Decals 2021Labels and Decals

GSKH2561S, GSKH2352S, GSKH1848S, GSKW2352S, GSKW1948S specifications

Great Dane has established itself as a leader in the manufacturing of high-quality trailers, and models like the GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, and GSKH2561S showcase the company's commitment to innovation and durability. These models are designed to meet the evolving needs of the transportation industry, offering a blend of advanced technology, superior materials, and customizable features.

The GSKW1948S and GSKW2352S are known for their enhanced weight distribution and aerodynamics. Equipped with lightweight materials, these models help increase payload capacity while ensuring fuel efficiency. The aerodynamic design minimizes drag, ultimately leading to reduced fuel consumption, which is a significant cost-saving advantage for fleet operators.

In contrast, the GSKH1848S, GSKH2352S, and GSKH2561S are tailored for heavier loads while maintaining structural integrity and safety. These models utilize high-strength steel and advanced welding techniques to ensure they withstand the rigors of long-haul transportation. Additionally, these trailers have a robust suspension system that provides a smooth ride, reducing wear and tear on both the vehicle and the cargo.

All five models come equipped with state-of-the-art technology, featuring telematics systems that allow for real-time monitoring of trailer performance and location. This feature enables fleet managers to optimize routes and improve operational efficiency. Moreover, each model boasts easy access points for maintenance, aiding in reducing downtime and overall operating costs.

Great Dane trailers also prioritize safety with features like anti-lock braking systems and enhanced visibility lighting. The design not only meets but often exceeds industry standards for safety, providing peace of mind to operators who need to transport goods across long distances.

In conclusion, the GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, and GSKH2561S models reflect Great Dane’s commitment to quality and innovation. With their combination of lightweight design, advanced technology, and safety features, these trailers offer reliable solutions for businesses seeking to optimize their logistics and transportation services. Investing in a Great Dane trailer means investing in efficiency, safety, and durability.
Top Page Image Contents