Grizzly G0639 owner manual Setup Safety, Items Needed for Setup, Unpacking

Page 11

SECTION 2: SETUP

Setup Safety

This machine presents serious injury hazards to untrained users. Read through this entire manual to become familiar with the controls and operations before starting the machine!

Wear

safety

glasses

during

the

entire

setup

process

and

 

during

operations!

 

 

Wear gloves during the entire setup process and during operations!

This log splitter is heavy. Get help whenever tilting the hydraulic ram and beam back and forth between the horizontal and vertical positions.

Items Needed for

Setup

The following items are needed to complete the setup process, but are not included with your machine:

Needed Items

Qty.

• Hoist 1000 lb. Min. Capacity

1

• Lifting Straps 1000 lb. Min. Capacity

2

• Safety Glasses for Each Person

1 Ea

• Pair of Gloves for Each Person

1 Ea

Combination Wrench Set,10-18mm

1 Ea

Screwdrivers #2 Standard

2

Unpacking

Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover the machine is damaged, please imme- diately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi- tion of your shipment, inventory the contents.

Model G0639 22-Ton Hydraulic Log Splitter

-9-

Image 11
Contents Model G0639 22-TON Hydraulic LOG Splitter Page Table of Contents Foreword Contact Info IntroductionMachine Data Sheet Features Identification Safety Instructions for Machinery Model G0639 22-Ton Hydraulic Log Splitter Additional Safety Instructions for Hydraulic Log Splitters Unpacking SetupSetup Safety Items Needed for SetupInventory Box Contents Figure QtyHardware Bag Contents Figure Qty To assemble the log splitter AssemblyBeam lock Model G0639 22-Ton Hydraulic Log Splitter Installed engine Low pressure hose and tank fitting To test run and break-in the log splitter Test Run/Break-InJob Site Considerations Operation SafetyOperations Control Valve TransportingTo operate the log splitter Splitting LogsChecking/Adding Hydraulic Fluid MaintenanceCleaning ScheduleChanging Hydraulic Fluid Wedge points Sharpening Splitting WedgeTroubleshooting ServiceHydraulic System Schematic Hydraulic and Chassis Diagram Description Parts ListSafety Label Placement & Parts List Page Page Warranty and Returns