General safety instructions

To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this Manual. All persons who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards.

Children and infirm people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.

WARNING. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read and heed the advice given in the additional important safety instructions.

Safety rules for petrol blowers

Training

•Read the instructions carefully. Get familiar with the controls and proper use of the equipment.

•Only use the blower for the purpose for which it was designed, i.e. blowing garden debris. Any other use can be hazardous, causing damage to the machine.

•Never allow children or people unfamiliar with these instructions to use the blower. Local regulations may restrict the age of the operator.

•Never use the blower:

–When people, especially children, or pets are nearby.

–If the operator has taken medicine or substances that can affect his ability to react and concentrate.

•Remember that the operator or user is responsible for accidents or hazards occurring to other people or their property.

Preparation

•While blowing, always wear sturdy footwear and long trousers. Do not operate the equipment with bare feet or open sandals.

•WARNING: DANGER! Engine fuel is highly flammable:

–Store fuel in containers specifically designed for this purpose.

–Refuel using a funnel and outdoors only. Do not smoke while re-fuelling or whenever handling the fuel.

–Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel while the engine is running or when the engine is hot.

–If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until the fuel has evaporated and the vapour dispersed.

–Replace all fuel tanks and containers caps securely.

•Substitute faulty silencers.

•Before use, always inspect the machine and check that the screws are not worn or damaged.

•It is advisable to wear suitable eye protection when operating the blower.

Maintenance and storage

•Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. Regular maintenance is essential for safety and performance.

•Never store the equipment with fuel in the tank inside a building where vapour may reach a flame or a spark or a source of extreme heat.

•Allow the engine to cool before storing in an enclosed space.

•To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment (if applicable) and fuel storage area free of grass, leaves, or excessive grease.

•If the fuel tank has to be drained, this should be done outdoors and when the engine is cool.

•For reasons of safety, do not use the equipment with worn or damaged parts. Parts are to be replaced and not repaired. Parts that are not of the same quality can damage the equipment and be dangerous for your safety.

BPB41 specifications

Global Machinery Company has consistently been at the forefront of innovation in the heavy machinery industry, and one of its standout products is the BPB41. This advanced machine is designed to meet the rigorous demands of construction, mining, and other industrial applications, showcasing a unique blend of power, efficiency, and reliability.

One of the most significant features of the BPB41 is its robust engine, which delivers high horsepower while maintaining low fuel consumption. This efficient powertrain not only provides the necessary strength for heavy-duty tasks but also aligns with the growing global emphasis on reducing environmental impact. Advanced fuel injection systems and smart engine management technologies ensure that the BPB41 operates optimally under various load conditions, translating to cost savings for operators.

The BPB41 incorporates cutting-edge technology that enhances operational efficiency. Its integrated GPS tracking system allows for real-time monitoring of machine location and performance metrics, enabling managers to make informed decisions regarding fleet management. Additionally, the machine features an intuitive user interface, providing operators with easy access to vital information and settings. This user-centered design minimizes training time and enhances productivity on the job site.

Another remarkable characteristic of the BPB41 is its adaptability. The machine is equipped with interchangeable attachments, allowing it to perform a variety of tasks, from excavation to material handling. This versatility makes the BPB41 an essential asset for contractors looking to maximize their investment in heavy machinery. The quick-change attachment system minimizes downtime between tasks, ensuring that operators can switch gears seamlessly.

Safety is a top priority for Global Machinery Company, and the BPB41 features several built-in safety mechanisms. From advanced monitoring systems that alert operators of potential hazards to ergonomic design considerations that promote safe operation, every aspect of the machine is engineered with safety in mind.

Durability is another hallmark of the BPB41. Constructed from high-grade materials, the machine is designed to withstand the toughest job site conditions, ensuring longevity and reduced maintenance costs. The rugged design, combined with easy access to service points, simplifies routine maintenance and enhances reliability.

In summary, the Global Machinery Company BPB41 stands out as a pinnacle of modern engineering, combining power, efficiency, and safety in a versatile package. Its advanced features and technologies make it an invaluable tool for industries that require reliability and performance, solidifying its reputation in the global market.