Global Machinery Company BPB41 manual

•Fuel goes off fairly quickly. If you find your blower does not start, 1st change the fuel in the tank with newly purchased fuel.

Service

•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Operation safety instructions

WARNING. Stop the engine and unplug the spark plug before any repairs or maintenance operations.

•Check that all nuts, bolts and screws are well tightened before every use.

•Do not run the engine in an enclosed and/or poorly ventilated area. The gas of the engine contains carbon monoxide, which is dangerous to your health.

•Work only when there is sufficient light.

•Do not use the blower when it is raining or when the grass is wet.

•Caution must be taken while blowing on slopes.

•Turn off the engine if you must leave the blower unattended.

•Never change the rated speed of the engine in any way.

•Stop the engine and remove the spark plug cover in these cases:

-Before any maintenance, repairing or checking operations.

-If you leave the blower unattended.

-If the blower vibrates in an abnormal way, take the blower to an authorized service centre.

-Check the bolts and nuts regularly. Bolts and nuts may vibrate loose over time.

WARNING. Fuel is highly flammable.

•Keep fuel in a jerry can specially made for this purpose.

•Fill the fuel tank with a funnel and outside. Do not smoke or use a mobile phone during this process.

•Fill with fuel and oil before starting the engine. Never open the cap of the fuel tank to add gasoline while the engine is running or still hot.

•Do not start the engine if there is spilt fuel on the blower or in the area surrounding. Take the blower away from the zone where fuel has been split and avoid any contact from a hot source as long as the split gasoline is completely evaporated.

•Tighten the fuel tank cap and jerry can cap tightly.

Additional safety rules for petrol blowers

•Do not operate in a hazardous location. Such areas include where there is a risk of explosion of petrol fumes, leaking gas or explosive dust.

•Do not operate in a confined area. Exhaust gases, smoke or fumes could reach dangerous concentrations.

•Protect your blower. This blower is NOT WEATHERPROOF and should not be exposed to direct sunlight, high ambient temperature and damp, wet or high humidity conditions.

•Do not smoke while refuelling. This is potentially dangerous as it may ignite the fuel and cause an explosion.

•Take care not to spill fuel. When refuelling the blower ensure that the motor has been switched off. Prevent the spilling of fuel as this may also ignite with the hot motor. Never refuel whilst the engine running.

•Be careful where you store the blower. Store the blower in a dry area away from flammable liquids.

•Keep your distance. The blower emits exhaust fumes. Ensure bystanders keep a safe distance.

•Ensure you use oil-mix fuel. Ensure that you mix 40 parts unleaded fuel to 1 part engine grade oil. If not, the engine will overheat and cause damage to your blower.

•Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

•Stop the engine before re-fuelling.

BPB41 specifications

Global Machinery Company has consistently been at the forefront of innovation in the heavy machinery industry, and one of its standout products is the BPB41. This advanced machine is designed to meet the rigorous demands of construction, mining, and other industrial applications, showcasing a unique blend of power, efficiency, and reliability.

One of the most significant features of the BPB41 is its robust engine, which delivers high horsepower while maintaining low fuel consumption. This efficient powertrain not only provides the necessary strength for heavy-duty tasks but also aligns with the growing global emphasis on reducing environmental impact. Advanced fuel injection systems and smart engine management technologies ensure that the BPB41 operates optimally under various load conditions, translating to cost savings for operators.

The BPB41 incorporates cutting-edge technology that enhances operational efficiency. Its integrated GPS tracking system allows for real-time monitoring of machine location and performance metrics, enabling managers to make informed decisions regarding fleet management. Additionally, the machine features an intuitive user interface, providing operators with easy access to vital information and settings. This user-centered design minimizes training time and enhances productivity on the job site.

Another remarkable characteristic of the BPB41 is its adaptability. The machine is equipped with interchangeable attachments, allowing it to perform a variety of tasks, from excavation to material handling. This versatility makes the BPB41 an essential asset for contractors looking to maximize their investment in heavy machinery. The quick-change attachment system minimizes downtime between tasks, ensuring that operators can switch gears seamlessly.

Safety is a top priority for Global Machinery Company, and the BPB41 features several built-in safety mechanisms. From advanced monitoring systems that alert operators of potential hazards to ergonomic design considerations that promote safe operation, every aspect of the machine is engineered with safety in mind.

Durability is another hallmark of the BPB41. Constructed from high-grade materials, the machine is designed to withstand the toughest job site conditions, ensuring longevity and reduced maintenance costs. The rugged design, combined with easy access to service points, simplifies routine maintenance and enhances reliability.

In summary, the Global Machinery Company BPB41 stands out as a pinnacle of modern engineering, combining power, efficiency, and safety in a versatile package. Its advanced features and technologies make it an invaluable tool for industries that require reliability and performance, solidifying its reputation in the global market.