Air filter, Useful tips, Servicing | Global Machinery Company BPB41

Air filter

Accumulated dust in the air filter will reduce engine efficiency, increase fuel consumption and allow abrasive particles to pass into the engine. Remove the air filter as often as necessary to maintain a clean condition.

IMPORTANT. The air filter should be checked approximately every 10 hours of use, or more frequently in dusty areas.

1.Remove the air filter cover retaining screw (15), and remove the cover and filter element.

2.Inspect the element. If the element is distorted or damaged, replace it with a new one.

3.Wash the filter in detergent and water. Rinse the filter thoroughly. Squeeze out excess water. Allow it to dry completely before reinstalling.

4.Install the element and cover and then tighten the retaining screw.

Useful tips

•Light surface dust can readily be removed by tapping the filter.

•Heavy deposits should be washed out in suitable detergent.

•Squeeze out the remaining water and allow the filter to completely dry.

•Add a drop of thin oil to the filter and replace it.

Servicing

•It is recommended once you first use your petrol blower have it serviced after 15 hours of use by an authorised service centre.

•From thereafter, service the petrol blower every 2 years.

Storage and maintenance after use

•When you finish working, clean the petrol blower completely.

•Inspect the entire blower and tubes for damage, including loose or missing components, and repair anything necessary.

•Store the petrol blower away from direct sunlight.

•Do not store in a nylon bag as this can encourage the formation of mould.

•Use a small brush to clean off the outside of the unit and keep the air vents free from obstructions. Do not use water or a hose to clean the unit.

Whenever the machine is not used for a long period of time, proceed as follows:

•Give the petrol blower an overall cleaning and a thorough check.

•Empty the fuel tank completely, then clean the carburetor and lines by running the blower until it stops from lack of fuel.

•Protect all metal engine parts from corrosion by coating them with oil.

•Remove the spark plug, put several drops of oil into the cylinder through the spark plug hole and then pull the recoil starter 2 to 3 times in order to distribute the oil evenly. Replace the spark plug and spark plug cover.

•Clean the air filter as described in the air filter section.

BPB41 specifications

Global Machinery Company has consistently been at the forefront of innovation in the heavy machinery industry, and one of its standout products is the BPB41. This advanced machine is designed to meet the rigorous demands of construction, mining, and other industrial applications, showcasing a unique blend of power, efficiency, and reliability.

One of the most significant features of the BPB41 is its robust engine, which delivers high horsepower while maintaining low fuel consumption. This efficient powertrain not only provides the necessary strength for heavy-duty tasks but also aligns with the growing global emphasis on reducing environmental impact. Advanced fuel injection systems and smart engine management technologies ensure that the BPB41 operates optimally under various load conditions, translating to cost savings for operators.

The BPB41 incorporates cutting-edge technology that enhances operational efficiency. Its integrated GPS tracking system allows for real-time monitoring of machine location and performance metrics, enabling managers to make informed decisions regarding fleet management. Additionally, the machine features an intuitive user interface, providing operators with easy access to vital information and settings. This user-centered design minimizes training time and enhances productivity on the job site.

Another remarkable characteristic of the BPB41 is its adaptability. The machine is equipped with interchangeable attachments, allowing it to perform a variety of tasks, from excavation to material handling. This versatility makes the BPB41 an essential asset for contractors looking to maximize their investment in heavy machinery. The quick-change attachment system minimizes downtime between tasks, ensuring that operators can switch gears seamlessly.

Safety is a top priority for Global Machinery Company, and the BPB41 features several built-in safety mechanisms. From advanced monitoring systems that alert operators of potential hazards to ergonomic design considerations that promote safe operation, every aspect of the machine is engineered with safety in mind.

Durability is another hallmark of the BPB41. Constructed from high-grade materials, the machine is designed to withstand the toughest job site conditions, ensuring longevity and reduced maintenance costs. The rugged design, combined with easy access to service points, simplifies routine maintenance and enhances reliability.

In summary, the Global Machinery Company BPB41 stands out as a pinnacle of modern engineering, combining power, efficiency, and safety in a versatile package. Its advanced features and technologies make it an invaluable tool for industries that require reliability and performance, solidifying its reputation in the global market.