Filling the fuel tank, Operation | Global Machinery Company BPB41

Filling the fuel tank

WARNING. Always shut off the engine before fuelling.

Never add fuel to a machine with a running or hot engine. Move at least 9 m (30 ft.) away from the re-fuelling site before starting engine. Do not smoke when re-fuelling or operating the blower.

WARNING. Do not use another mixture ratio other than 40:1 and never use pure fuel. Do not use fuel that is more than

2-3 months old. Empty the tank during longer breaks and fill it up again as soon you wish to use the blower again.

Note. It is normal for smoke to be emitted from a new engine during and after first use.

1.Place the blower upright on the ground or on a sturdy bench and wipe any debris from around the fuel cap (7).

2.Unscrew the fuel cap (7) and pour the mixture into the tank using a funnel (not supplied).

3.Be careful not to spill any mixture. If this happens, wipe the spill with a clean rag.

4.Start the engine at least three metres away from the area where the fuel tank has been filled up in order to avoid any risk of fire.

•Danger of fire and burn injuries.

•Always use extreme care when handling fuel! Fuel is highly flammable.

•Never attempt to fuel the blower if the fuel system components are damaged or are leaking.

•Never attempt the refuel the engine while it is running or still warm, allow it to cool before fuelling.

•Never smoke or light any fires near the blower or fuels.

•Always transport and store fuels in an approved container.

•Never place flammable material close the engine muffler.

•Do not use petrol which contains ethanol or methanol as it may damage the fuel lines and other engine parts.

•Mix only enough fuel for your immediate needs. If fuel must be stored longer than 30 days, it should first be treated with a stabilizer or similar product.

Fitting the safety straps (shoulder and waist)

IMPORTANT. Safety straps must be completely adjusted before initially starting the blower.

IMPORTANT. Ensure the straps are always used to support the blower during use.

The blower must be used with the shoulder straps (13) and waist strap (18) provided.

Note. Adjust the straps first with the device in the off position.

1.Place the shoulder straps on your shoulders and fasten the waist strap by pushing the buckles together.

2.Set the belt lengths tight for greater safety and comfort during use.

Operation

IMPORTANT. Do not allow the machine to operate continuously for a long time. Keep it switched off for 20 minutes for every 30 minutes of operation. Total operation time in a day should be less than two hours.

Starting the blower

To start the engine, proceed as follows:

For cold starting:

1.Manually press the primer (9)

5 to 6 times or until there are no air bubbles visible in the fuel discharge line. This will indicate that the carburettor is full

2.Close the air filter damper (16).

BPB41 specifications

Global Machinery Company has consistently been at the forefront of innovation in the heavy machinery industry, and one of its standout products is the BPB41. This advanced machine is designed to meet the rigorous demands of construction, mining, and other industrial applications, showcasing a unique blend of power, efficiency, and reliability.

One of the most significant features of the BPB41 is its robust engine, which delivers high horsepower while maintaining low fuel consumption. This efficient powertrain not only provides the necessary strength for heavy-duty tasks but also aligns with the growing global emphasis on reducing environmental impact. Advanced fuel injection systems and smart engine management technologies ensure that the BPB41 operates optimally under various load conditions, translating to cost savings for operators.

The BPB41 incorporates cutting-edge technology that enhances operational efficiency. Its integrated GPS tracking system allows for real-time monitoring of machine location and performance metrics, enabling managers to make informed decisions regarding fleet management. Additionally, the machine features an intuitive user interface, providing operators with easy access to vital information and settings. This user-centered design minimizes training time and enhances productivity on the job site.

Another remarkable characteristic of the BPB41 is its adaptability. The machine is equipped with interchangeable attachments, allowing it to perform a variety of tasks, from excavation to material handling. This versatility makes the BPB41 an essential asset for contractors looking to maximize their investment in heavy machinery. The quick-change attachment system minimizes downtime between tasks, ensuring that operators can switch gears seamlessly.

Safety is a top priority for Global Machinery Company, and the BPB41 features several built-in safety mechanisms. From advanced monitoring systems that alert operators of potential hazards to ergonomic design considerations that promote safe operation, every aspect of the machine is engineered with safety in mind.

Durability is another hallmark of the BPB41. Constructed from high-grade materials, the machine is designed to withstand the toughest job site conditions, ensuring longevity and reduced maintenance costs. The rugged design, combined with easy access to service points, simplifies routine maintenance and enhances reliability.

In summary, the Global Machinery Company BPB41 stands out as a pinnacle of modern engineering, combining power, efficiency, and safety in a versatile package. Its advanced features and technologies make it an invaluable tool for industries that require reliability and performance, solidifying its reputation in the global market.