Emerson CF220GBZ00, CF220GLZ00, CF220AGW00 owner manual Materials, Unpacking Instructions

Page 3

BP7360 JULIANNE 9/19/07 11:15 AM Page 3

This Manual Is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One Phillips head screwdriver One wire stripper

One stepladder

Seven wire connectors (supplied) Three 40-watt (maximum) Candelabra

bulbs

Materials

Wiring, outlet box and box connectors must be of type required by the local code. The minimum wire would be a 3-conductor (2-wire with ground) of the following sizes:

Installed Wire Length

Wire Size A.W.G.

Up to 50 ft.

14

50-100 ft.

12

!WARNING

Before assembling your ceiling fan, refer to section on proper method of wiring your fan (page 11). If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.

Unpacking Instructions

For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should you be interrupted.

!WARNING

Do not install or use fan if any part is damaged or missing. Call Toll-Free:

1-800-654-3545

!WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.

1. Open styrofoam unit containing fan. Remove top half of styrofoam unit. Remove parts and check to see that you have received the following parts:

NOTE: If you are uncertain of part description, refer to exploded view illustration.

a.Fan motor and housing assembly

b.One coupling cover

c.One ceiling cover

d.Five blade flanges

e.Five fan blades

f.One switch cup assembly

g.One hanger bracket

h.One hanger ball/downrod (18”) assembly

i.One 6” downrod

j.One lower glass

k.One decorative ring/light fitter assembly

l.One decorative cap

m.One finial nut

n.Three downrod scrolls

o.One scroll collar assembly

p.One Fan/Light Wall Control (transmitter and receiver)

3

U.L. Model No.: CF220

Image 3
Contents Model Numbers Dark CherryAged Walnut with Teak/Mahogany Blades Safety Instructions Additional Safety Instructions for InstallationDate Code Unpacking Instructions MaterialsEmerson Electrical Requirements Ceiling Fan Procedures How to Assemble Your Ceiling FanGeneral Flat Washer FAN Blade Blade Flange Switch CUP Assembly PIN Hanger Ball Downrod Setscrew Hairpin Downrod Setscrew TAB How to Hang Your Ceiling FanStud How to Wire Your Ceiling FanSW101 FAN/LIGHT Wall Control Supplied Black To HOT Setting Operating Frequency of Wall Control and Receiver Installation of Wall ControlDo not connect any neutral white Required WAY WIRlNG Diagram NEW ConstructionOperating Your Ceiling Fan On position.REVERSING SwitchMaintenanceAccessories Important Care InstructionsFor your Ceiling Fan Trouble Probable Cause Suggested Remedy Trouble ShootingHOW to Order Repair Parts Repair PartsKey Model No Description Repair Parts ListingAir Comfort Products Limited Warranty