Echo PPT-280 specifications Cutting Attachment to Drive Shaft Installation, Assembly

Page 15

PPT-280	ASSEMBLY

5.Connect 2 ignition stop leads (C,D) from throttle cable tubing to 2 ignition leads (C,D) on engine.

6.Gather ignition wires and position behind air filter case.

7.Install air filter and cover.

C

D

Cutting Attachment to Drive Shaft Installation

Saw Chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury may result

1.Loosen the two (2) screws (A) and remove locator screw (B) on cutting attachment.

A

2. Loosen clamp knob (E) turning counter clockwise.

B

F

E

X7702091009

15

© 02/2014 ECHO Inc.

Image 15

Contents Burn Hazard Operator’s ManualTable of Contents Introduction Servicing InformationIntroduction Manual Safety Symbols and Important Information SafetySafety Additional or Replacement ManualsMixture International SymbolsPersonal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdKeep a Firm Grip Read the ManualsClear the Work Area Use Proper Clothing & EquipmentKickback EquipmentGuide Bar and Saw Chain Product Emission Durability Emission Compliance Period Emission Control Exhaust & EvaporativeEmission Control Exhaust & Evaporative EPA 2010 and Later and/or C.A.R.B. TierDescription Description Contents Drive Shaft/Power Head AssemblyAssembly Drive Shaft/Handle AssemblyAssembly Cutting Attachment to Drive Shaft InstallationTo Adjust Saw Chain Tension Saw Chain Tension AdjustmentFuel Requirements OperationOperation FuelAfter use Handling FuelAdjusting Automatic Oiler Lubricating the Guide Bar and Saw ChainAutomatic Oiling System Purge Bulb Starting Cold EngineStopping Engine Starting Warm EnginePruning Techniques Skill Levels MaintenanceMaintenance Maintenance IntervalsFuel Filter Air FilterCooling System Spark PlugSpark Arrestor Screen Exhaust SystemHigh Altitude Operation Carburetor AdjustmentExhaust Port Cleaning Engine Break-InMAINTENANCEPPT-280 LubricationFlexible Drive Shaft Guide Bar and Saw Chain Replacement Guide Bar Replacement / InstallationSprocket Guard Cleaning BAR P/N Chain P/N Chain Type Links Pitch Guage Filing Standard Saw ChainTop Plate Angle Troubleshooting TroubleshootingStorage StorageLong Term Storage Over 30 Days Specifications SpecificationsOWNER’S Responsibility Warranty StatementsPurchased Repair PARTS, Short Blocks and Accessories Warranty StatementsPPT-280 PPT-280 PPT-280 ECHO, Incorporated