Echo PPT-280 specifications Read the Manuals, Clear the Work Area, Use Proper Clothing & Equipment

Page 8

SAFETY

PPT-280

 

 

 

 

 

 

All over head electrical conductors and communications wires can have electricity flow with high voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly, otherwise serious injury or death may result.

Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.

Read the Manuals

Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation.

Clear the Work Area

Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use.

Use Proper Clothing & Equipment

Always wear head protection with full face shield to help protect against falling branches and debris.

Keep a Firm Grip

Always hold throttle handle and support handle with thumbs and fingers tightly encircling the handles.

Keep a Solid Stance

Para más información escanea este código QR.

Maintain footing and balance at all times. Do not stand on

slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.

Operate the Power PrunerTM only from the ground or out of an approved bucket lift.

Always evaluate the branches to be pruned for hazards such as loose dead branches which may fall and strike the operator or helpers. Remove hazards before pruning.

Plan retreat path from falling objects.

Cut branches bounce when striking ground.

Check that shoulder harness is adjusted for safe, comfortable operation.

Turn the Power PrunerTM off when moving from tree to tree.

Avoid any contact with saw chain.

Avoid Hot Surfaces

Keep exhaust area clear of flammable debris. Avoid contact during and immediately after operation.

8

X7702091009

© 02/2014 ECHO Inc.

Image 8
Contents Operator’s Manual Burn HazardTable of Contents Introduction IntroductionServicing Information Safety SafetyAdditional or Replacement Manuals Manual Safety Symbols and Important Information International Symbols MixturePersonal Condition and Safety Equipment Vibration and Cold Repetitive Stress InjuriesRead the Manuals Clear the Work AreaUse Proper Clothing & Equipment Keep a Firm GripGuide Bar and Saw Chain KickbackEquipment Emission Control Exhaust & Evaporative Emission Control Exhaust & EvaporativeEPA 2010 and Later and/or C.A.R.B. Tier Product Emission Durability Emission Compliance PeriodDescription Description Contents Assembly AssemblyDrive Shaft/Handle Assembly Drive Shaft/Power HeadCutting Attachment to Drive Shaft Installation AssemblySaw Chain Tension Adjustment To Adjust Saw Chain TensionOperation OperationFuel Fuel RequirementsHandling Fuel After useAutomatic Oiling System Adjusting Automatic OilerLubricating the Guide Bar and Saw Chain Starting Cold Engine Purge BulbStarting Warm Engine Stopping EnginePruning Techniques Maintenance MaintenanceMaintenance Intervals Skill LevelsAir Filter Fuel FilterSpark Plug Cooling SystemExhaust System Spark Arrestor ScreenCarburetor Adjustment Exhaust Port CleaningEngine Break-In High Altitude OperationFlexible Drive Shaft MAINTENANCEPPT-280Lubrication Sprocket Guard Cleaning Guide Bar and Saw Chain ReplacementGuide Bar Replacement / Installation Filing Standard Saw Chain BAR P/N Chain P/N Chain Type Links Pitch GuageTop Plate Angle Troubleshooting TroubleshootingLong Term Storage Over 30 Days StorageStorage Specifications SpecificationsWarranty Statements OWNER’S ResponsibilityWarranty Statements Purchased Repair PARTS, Short Blocks and AccessoriesPPT-280 PPT-280 PPT-280 ECHO, Incorporated