Marantz DR-6000, MAR775 service manual CDR loader CDR main module CDL4009 or MAR770

Page 4

1.2.1 CDR loader (CDR main module CDL4009 or MAR770):

This complete CDR loader is considered as not repairable in the field. therefore this module will be repaired centrally. A module exchange procedure will be set up for this purpose. The module can be removed from the product by removing 4 screws and the transformer (see demounting the CDR module on page 1-7), and loosing the connectors.

This module is the complete CD recorder, it contains the following parts:

CD Mechanism (CDM4009'). Underneath this mechanism a PCB is mounted which is adjusted to the mechanism (laser current settings are stored in EEPROM).

Loader Assy. This mechanical assy takes care for the tray control.

Main PCB. This PCB takes care that the (analog or digital) signal to be recorded is converted into a suitable signal which can be recorded on the disc.

Digital signals with an other sampling frequency then 44.1kHz will be converted in the sample rate converter (DASP) to 44.1kHz.

Analog signals will be first converted into a digital converter by the AD converter.

This PCB also takes care that the signal from the CD (playback) is converted into a suitable digital signal (or analog via the DA converter).

The main microprocessor controls the several functions of this PCB.

1.2.2 Power Supply PCB.

This PCB contains the Power SW, which is jointed the Power bottom on the front panel. This PCB consists of power supply part. The power suppluy part delivers the several voltages for the diffrent PCB in the DR6050. On this power supply one fuse (primary side) is mounted on this PCB. All parts are available as spare parts.

1.2.3 Terminal PCB.

This PCB coutaius input and output terminals. All parts are available as spare parts.

1.2.4 Display Board.

This PCB contains the Display, which informs the user about the status of the recording/playback process and it also takes care for scanning the keys on the front panel. The information from the keys is fed via a I2 C connection to the main microprocessor on the CDR loader module. Information which needs to be displayed is also fed via this I2 C line from the main microprocessor on the CDR loader module to the display controller.

The parts for this PCB are available as service parts so this PCB can be repairable up to component level.

1.2.5 Headphone PCB.

This PCB contains the headphone socket.

IMPORTANT

In case of replace the CD-R module "MAR775", the initialization is necessary. Please initialize the CD-R module with following orders.

1.Press the POWER button (POWER ON) while depressing FINALIZE button and REC TYPE button together.

2.FL Display shows;

WAIT PGM PROTOCOL PGM PORT END

3.Press the POWER button (POWER OFF).

Then the CD-R module set up to DR6050 own status.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Service Manual USA Europe / TradingBrazil AmericasPlayback & Recording and Disc CDR loader CDR main module CDL4009 or MAR770 This PCB contains the headphone socketTechnical Specifications GeneralESD IIIService Hints Service Tools Dealer diagnostics Dealer modeStatus of player Electrical service diagnostics Software versions, test for defective componentsMechanical service diagnostics DC-erase service mode Erasement of complete CD-RWFaultfinding trees CDR-ModuleCD-DA Disc Loaded CD R Wiring Power Supply Voltages Electrical Service Diagnostics CD-RW Disc LoadedDisplay no CD RWCheck Flex Connection from CDR Main Board Power Supply +3V3 AT IC7000 Pins 5,17,21,57, Check Safety ResistorsCD Module OPEN/CLOSECD Module Playback Display Board Description of display boardGeneral description Display controller TMP87C874FClock signal Control signalsTest instructions Supply voltagesIR receiver remote control Easy jog knobRotary operation Push button operationDisplay board troubleshooting guide Clock SignalControl Signals FTD Drive LinesPower Supply Unit P816 Description of P816Description of controller MC44603 Pin connectionsPin Name Pin function descriptionVCC Block diagram of MC44603 Operating description of MC44603Start up sequence of P816 Regulation of P816Ch1 Drain voltage Ch2 Drain current Ch3 Gate voltage Circuit description of P816 Troubleshooting P816 CD Main BoardDescription Block DiagramMeasurements Pin Configuration Input conditions conn 1006 pin Outputs conn Ucoil Vcoil WcoilTest points on driver Hallu Hallv HallwDC Settings HF PathTransfer Characteristics Hfdet SettingIIS CLK11 Nmute DAC Amplifier Wiring Diagram PinkWY01at conn.F934of WY02 WY03 WY04 CDR main board 10 D5V WC01at conn.1209 WC02at conn.140012V CD W801at conn.1500Block Diagram CDR Main BoardSchematic Diagram and Parts Location PY46Switching Power Supply PCB. P816 Q810 Q801 Q891 Q871 Q825 Q861 Q862 Q851 Q892QN54 QN53 QN58 QN57 Q311 Q681 QF52 QF51 QN52 QN51 QG56 QN55 QY01 QY02 QY04Exploded View and Parts List Packing Not Standard Spear PartsCeramic CAP Electrical Parts ListElectroly CAP P816-POWER Circuit Board P816-CAPACITORS P816-RESISTORSP816-SEMICONDUCTORS P816-MISCELLANEOUSPP16-REAR Panel Circuit Board PP16-CAPACITORS PP16-RESISTORPP16-SEMICONDUCTORS PP16-MISCELLANEOUSPY36-ROTARY Encoder Circuit Board
Related manuals
Manual 1 pages 62.37 Kb

MAR770, MAR775, DR-6000 specifications

The Marantz DR-6050 and DR-6000 are revered components in the world of high-fidelity audio systems, reflecting the brand's long-standing commitment to quality and performance. These models have gained popularity among audiophiles for their comprehensive features and advanced technologies, which cater to both casual listeners and serious music enthusiasts.

The Marantz DR-6050 is a CD recorder and player that stands out with its dual functionality. It allows users to enjoy CDs while also having the capability to record directly from various sources, including analog inputs and digital connections. This functionality is essential for those who wish to preserve their vinyl records, cassettes, or other audio formats onto CD. The machine supports CD-R and CD-RW media, providing flexibility for repeated use and recording.

One of the standout technologies in the DR-6050 is its high-quality Digital-to-Analog Converter (DAC), which significantly enhances sound performance by converting digital signals to analog with incredible accuracy. This contributes to the unit's ability to reproduce audio with rich detail and clarity. Additionally, the recorder is equipped with a Microprocessor that ensures precise recording levels and optimizes the quality of the output.

On the other hand, the Marantz DR-6000 offers similar capabilities but with an emphasis on simplicity and ease of use. Designed for users who appreciate an intuitive interface, it features straightforward controls and an ergonomic design. The DR-6000 supports multiple recording formats, including standard audio CDs, making it versatile for various playback systems.

Both models are built with high-grade components that promise longevity and reliability. They feature robust construction, ensuring minimal vibration and interference to enhance playback quality. Integrated analog and digital inputs allow for diverse connectivity options, which is crucial for users with elaborate audio setups.

In terms of audio performance, both the DR-6050 and DR-6000 exhibit impressive frequency response and low distortion levels, characteristics that are vital for a satisfying listening experience. The devices also include features like playback speed control and disc finalization options, providing the user with complete control over their audio sessions.

The Marantz DR-6050 and DR-6000 are ultimate companions for those who appreciate high-quality sound and need versatile recording solutions. With their blend of advanced technologies, clear audio output, and user-friendly designs, they remain solid choices for anyone looking to enhance their audio collection and experience.
Top Page Image Contents