Echo PB-760 LN H/T specifications Description

Page 12

DESCRIPTION

PB-760 LN H/T

 

 

1.SPARK PLUG - Provides spark to ignite fuel mixture.

2.SAFETY DECAL - Lists important safety precautions.

3.SPARK ARRESTOR - CATALYTIC MUFFLER / MUFFLER - The muffler or catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.

4.FUEL TANK - Contains fuel and fuel filter.

5.FUEL TANK CAP - Covers and seals fuel tank.

6.RECOIL STARTER HANDLE - Pull recoil handle slowly until recoil starter engages, then quickly and firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.

7.AIR CLEANER - Contains replaceable air filter element.

8. CHOKE - Move lever UP to close choke ( ) (starting position) and for emergency stopping. Move DOWN to open choke ( ) (run position).

9.PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge bulb an additional 4 or 5 times.

10.SHOULDER HARNESS - Used to support unit on operator's back. The straps are adjustable.

11.HANDLE - Used by operator to direct and control air flow.

12.COMBINATION THROTTLE POSITION / STOP SWITCH BUTTON - Controls engine speed and turns ignition on or off. Forward position - STOP. First detent position - IDLE. Move button back to increase speed, forward to decrease speed. Use Throttle Position Button to set and hold blower speed for continuous operation.

13.THROTTLE TRIGGER - Spring - loaded Throttle Trigger controls engine speed. Releasing Trigger returns engine to speed set by Throttle Position Stop Switch Button. Always release trigger and allow engine to return to idle before shutting off with Throttle Position Stop Switch Button. Use Throttle Trigger to vary blower speed settings for intermittent operation.

14.LOCKING KNOB - Allows operator to adjust handle position for optimum comfort and control.

15.BLOWER PIPES - Exclusive positive locking system.

16.FLEXIBLE PIPE - Allows for full range of movement.

12

X7531125002

© 03/2013 ECHO Inc.

Image 12
Contents Operator’s Manual Burn HazardTable of Contents Introduction Servicing InformationSafety Manual Safety Symbols and Important InformationInternational Symbols Personal Condition and Safety Equipment Vibration and Cold Repetitive Stress InjuriesEquipment Emission Control Exhaust & Evaporative EPA 2010 and Later and/or C.A.R.B. TierProduct Emission Durability Emission Compliance Period Description PB-760 LN HDescription PB-760 LN T Description Contents Assembly Install Blower Pipes/Stick HandleInstall Blower Pipes AssemblyX7531125002 Operation FuelFuel Requirements Handling FuelOperation Starting Cold Engine PB-760 LN H and TStarting Warm Engine Stopping EngineRead the Safety Section carefully Operating BlowerCold Weather Operation Maintenance Maintenance IntervalsSkill Levels Air Filter Fuel FilterCleaning Grill Spark PlugCooling System Cleaning Cylinder Fins Exhaust SystemSpark Arrestor Screen Carburetor Adjustment Exhaust Port CleaningEngine Break-In High Altitude OperationIdle Adjustment Troubleshooting Engine Problem Troubleshooting ChartStorage Long Term Storage Over 30 DaysSpecifications ModelWarranty Statements OWNER’S ResponsibilityWarranty Statements PB-760 LN H/T PB-760 LN H/T