Echo PB-760 LN H/T specifications Starting Warm Engine, Stopping Engine

Page 20

OPERATION

PB-760 LN H/T

 

 

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the choke.

-PB-760 LN H

1.Throttle Lever

Move throttle position lever (A) to IDLE DETENT positions.

-PB-760 LN T

1.Throttle Position / Stop Switch Button

Slide Throttle Position / Stop Switch Button (A) back to idle position.

- PB-760 LN H and T

2.Purge Bulb

Pump purge bulb (D) until fuel is visible. Pump bulb an additional 4 or 5 times.

3.Recoil Starter

Pull recoil starter handle (E) and engine should start. Do not use choke (C)

Note: If engine does not start after 5 pulls, use cold start procedures.

Stopping Engine

-PB-760 LN H

1.Throttle Lever

Move throttle lever (A) to IDLE DETENT position and allow engine to return to idle before shutting off engine.

2.Throttle Lever

Move throttle lever (A) to "O" (Stop) position.

-PB-760 LN T

1.Throttle Position / Stop Switch Button

PB-760 LN H

A

PB-760 LN T

C

E

D

PB-760 LN H

A

PB-760 LN T

Release throttle trigger. Move Throttle Position / Stop Switch Button (A) forward to idle position and allow engine to return to idle before shutting off engine.

2.Throttle Position / Stop Switch Button

Move Throttle Position / Stop Switch Button (A) all the way forward to STOP position.

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using blower again.

20

X7531125002

© 03/2013 ECHO Inc.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operator’s Manual Burn HazardTable of Contents Introduction Servicing InformationInternational Symbols SafetyManual Safety Symbols and Important Information Personal Condition and Safety Equipment Vibration and Cold Repetitive Stress InjuriesEquipment Product Emission Durability Emission Compliance Period Emission Control Exhaust & EvaporativeEPA 2010 and Later and/or C.A.R.B. Tier Description PB-760 LN HDescription PB-760 LN T Description Contents Assembly Install Blower Pipes/Stick HandleInstall Blower Pipes AssemblyX7531125002 Operation FuelFuel Requirements Handling FuelOperation Starting Cold Engine PB-760 LN H and TStarting Warm Engine Stopping EngineRead the Safety Section carefully Operating BlowerCold Weather Operation Skill Levels MaintenanceMaintenance Intervals Air Filter Fuel FilterCooling System Cleaning GrillSpark Plug Spark Arrestor Screen Cleaning Cylinder FinsExhaust System Carburetor Adjustment Exhaust Port CleaningEngine Break-In High Altitude OperationIdle Adjustment Troubleshooting Engine Problem Troubleshooting ChartStorage Long Term Storage Over 30 DaysSpecifications ModelWarranty Statements OWNER’S ResponsibilityWarranty Statements PB-760 LN H/T PB-760 LN H/T
Top Page Image Contents