Echo CS-500P instruction manual Correct USE of Chain Brake, Spark Arrestor Muffler

Page 11

SPARK ARRESTOR MUFFLER

•The spark arrestor muffler controls the exhaust noise and prevents hot, glowing particles of carbon from leaving the muffler.

Make sure the spark arrestor screen is in good repair and properly seated in the muffler.

•Certain internal combustion engines operated on forest, brush, and/or grass-covered areas in the states of Washington, Oregon, Idaho, California, Minnesota, New Jersey and Maine, are required to be equipped with a spark arrestor.

This requirement also applies to all U.S. Forest Service lands.

In some of these areas, the spark arrestor system must be certified per USDA Forest Service Regulation SAE J335.

Check with your local or state authorities for specific regulations in your area.

Failure to follow these requirements is a violation of the law.

CORRECT USE OF CHAIN BRAKE

Rotational kickback

Reduced radius belongs on top

Rotational kickback

Chain moving downward at impact

Linear kickback

Pinch

DANGER

Kickback safety precaution for chain saw users: Kickback may occur when the nose or tip of the guide bar touches an object or when the wood closes in and pinches the saw chain in the cut.

The installation of a chain brake may be mandatory by law or as stipulated by insurance regulations in your area of operation.

You should inquire through local government offices, your employer or your local dealer to ensure that your chain saw conforms to the required safety standard.

ECHO chain brakes have been designed and tested to comply with international safety standards as follows.

This model needs to use low-kickback chain and bar.

Do not use a combination other than those specified on page 22.

For your own safety, do not remove the chain brake system.

USA

: ANSI Standard B175.1 - 2000

 

Safety Requirement for chain saws

Canada : CSA Standard Z 62.1 CHAIN SAWS

WARNING

ANSI Standard B175.1 - 2000 stipulates that the brake shall stop the chain 0.12 seconds at an engine speed of 13500 r/min.

It is the responsibility of the owner/operator to ensure that the brake is serviced, adjusted and tested strictly in accordance with the instructions as detailed herein in order to ensure that the brake performance is maintained in compliance with the Standard B175.1 - 2000.

9

CS-500P

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Chain SAW Copyright 2010 All Rights Reserved Rules for Safe Operation Kickback Safety Precautions for Chain Saw UsersOther Safety Precautions Symbols and Signs ContentsDecals Symbol FormPacking List Nomenclature of Parts Nomenclature of Parts Operator Safety Spark Arrestor Muffler Correct USE of Chain BrakePreparation for USE Guide BAR and SAW Chain INSTALLATION/REMOVALAdjusting Chain Tension Fuel Statement Fuel and LubricantEmission Control Emission DataHandling Fuel Chain Lubricant OperationWhen the Engine is Warm When the Engine is ColdChain Lubrication Test RunningStopping Checking Chain TensionGeneral Cutting InstructionFelling the Tree Bucking LimbingChain Brake Operation Testing the BrakeWinter Operation Automatic Chain BrakeSAW Chain Chain and Guide BAR CombinationGuide BAR Skill Levels Maintenance and CareMaintenance Intervals Cutting attachment must not move when unit is idling Carburetor AdjustmentFuel Filter AIR FilterCheck Fuel Systm Spark PlugAutomatic Oiler SprocketCylinder Fins Muffler Spark ArrestorSetting SAW Chain Setting the SAW ChainCS-500P Problem Cause Remedy TroubleshootingStorage After USE Technical DataExceptions Warranty StatementsPurchased Repair PARTS, Short Blocks and Accessories MANUFACTURER’S Warranty Coverage

CS-500P specifications

The Echo CS-500P is a robust chainsaw designed for both professional landscapers and avid homeowners. Combining power, efficiency, and advanced technology, this chainsaw is ideal for cutting tasks ranging from light pruning to heavy-duty tree felling.

At the heart of the Echo CS-500P is a 50.2 cc professional-grade two-stroke engine that allows the chainsaw to deliver exceptional power. This engine technology not only ensures high performance but also optimizes fuel efficiency, enabling longer run times between refuels. The engine is designed to reduce emissions, complying with stringent environmental standards, making it an eco-friendlier option in its class.

The CS-500P features a high-quality 20-inch bar and chain, which provides excellent cutting capacity. The chain is designed for high performance, delivering smooth cuts while minimizing kickback—a vital feature that enhances operator safety. Additionally, it comes equipped with a centrifugal air cleaning system that removes larger dust and debris particles before they reach the air filter. This system significantly extends the life of the air filter and reduces maintenance needs, ensuring the chainsaw operates at peak performance for longer periods.

Another key feature of the Echo CS-500P is its ergonomic design. The chainsaw includes a lightweight design that balances power and portability, allowing for easy handling during extended use. The anti-vibration technology incorporated into the handle effectively reduces user fatigue, making it suitable for extensive cutting tasks.

Further enhancing the user experience is the easy-to-use starting system. The CS-500P features a mechanical ignition system that allows for quick startups, even in cold conditions. The side-access chain tensioner simplifies chain adjustment, ensuring that the chain remains properly tightened without the need for additional tools.

Built for durability, the Echo CS-500P is constructed with high-quality materials, ensuring it can withstand the rigors of professional use. With its combination of power, efficiency, and innovative design, the Echo CS-500P chainsaw is an excellent choice for anyone in need of a reliable cutting tool, whether for occasional yard work or intensive forestry tasks. The Echo name is synonymous with quality, making this chainsaw a trusted companion for those who demand performance and dependability.
Top Page Image Contents