Echo CS-500P instruction manual Other Safety Precautions

Page 4

B. Other Safety Precautions

1.Do not operate a chain saw with one hand! Serious injury to the operator, helpers, bystanders, or any combination of these persons may result from one-handed operation. A chain saw is intended for two- handed use.

2.Do not operate a chain saw when you are fatigued.

3.Use safety footwear, snug-fitting

clothing and protective gloves. Wear eye, hearing, and head protection devices.

4.Use caution when handling fuel. Move the chain saw at least 3 m

(10 feet) from the fueling point before starting the engine.

5.Do not allow other persons to be near the chain saw when starting or cutting with the chain saw.

Keep bystanders and animals out of the work area.

6.Do not start cutting until you have a clear work area, secure footing, and a planned retreat path from the falling tree.

7.Keep all parts of your body away from the saw chain when the engine is running.

8.Before you start the engine, make sure that the saw chain is not contacting anything.

9.Carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and the muffler away from your body.

10.Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released.

11.Shut off the engine before setting the chain saw down.

12.Use extreme caution when cutting small size brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance.

13.When cutting a limb that is under tension, be alert for spring-back so that you will not be struck when the tension in the wood fibers is released.

14.Keep the handles dry, clean, and free of oil or fuel mixture.

15.Operate the chain saw only in well ventilated areas.

16.Do not operate a chain saw in a tree unless you have been specifically trained to do so.

17.All chain saw service, other than items listed in the Instruction manual maintenance instructions, should be performed by competent service personnel.

(For example, if improper tools are used to remove the flywheel or if an improper tool is used to hold the flywheel in order to remove the clutch, structural damage to the flywheel could occur and could subsequently cause the flywheel to burst.)

18.When transporting your chain saw, use

the appropriate guide bar scabbard.

19.Spark arrestor mufflers approved to SAE Standard J335 are standard on ECHO chain saws to reduce the possibility of forest fires.

Do not operate the chain saw with a loose or defective muffler.

Do not remove the spark arrestor screen.

CS-500P

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Chain SAW Copyright 2010 All Rights Reserved Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationOther Safety Precautions Contents Symbols and SignsSymbol Form DecalsPacking List Nomenclature of Parts Nomenclature of Parts Operator Safety Correct USE of Chain Brake Spark Arrestor MufflerGuide BAR and SAW Chain INSTALLATION/REMOVAL Preparation for USEAdjusting Chain Tension Fuel and Lubricant Fuel StatementHandling Fuel Emission DataEmission Control Operation Chain LubricantWhen the Engine is Cold When the Engine is WarmRunning StoppingChecking Chain Tension Chain Lubrication TestCutting Instruction GeneralFelling the Tree Limbing BuckingTesting the Brake Chain Brake OperationAutomatic Chain Brake Winter OperationGuide BAR Chain and Guide BAR CombinationSAW Chain Maintenance Intervals Maintenance and CareSkill Levels Carburetor Adjustment Cutting attachment must not move when unit is idlingAIR Filter Check Fuel SystmSpark Plug Fuel FilterSprocket Cylinder FinsMuffler Spark Arrestor Automatic OilerSetting the SAW Chain Setting SAW ChainCS-500P Troubleshooting Problem Cause RemedyTechnical Data Storage After USEWarranty Statements ExceptionsPurchased Repair PARTS, Short Blocks and Accessories MANUFACTURER’S Warranty Coverage

CS-500P specifications

The Echo CS-500P is a robust chainsaw designed for both professional landscapers and avid homeowners. Combining power, efficiency, and advanced technology, this chainsaw is ideal for cutting tasks ranging from light pruning to heavy-duty tree felling.

At the heart of the Echo CS-500P is a 50.2 cc professional-grade two-stroke engine that allows the chainsaw to deliver exceptional power. This engine technology not only ensures high performance but also optimizes fuel efficiency, enabling longer run times between refuels. The engine is designed to reduce emissions, complying with stringent environmental standards, making it an eco-friendlier option in its class.

The CS-500P features a high-quality 20-inch bar and chain, which provides excellent cutting capacity. The chain is designed for high performance, delivering smooth cuts while minimizing kickback—a vital feature that enhances operator safety. Additionally, it comes equipped with a centrifugal air cleaning system that removes larger dust and debris particles before they reach the air filter. This system significantly extends the life of the air filter and reduces maintenance needs, ensuring the chainsaw operates at peak performance for longer periods.

Another key feature of the Echo CS-500P is its ergonomic design. The chainsaw includes a lightweight design that balances power and portability, allowing for easy handling during extended use. The anti-vibration technology incorporated into the handle effectively reduces user fatigue, making it suitable for extensive cutting tasks.

Further enhancing the user experience is the easy-to-use starting system. The CS-500P features a mechanical ignition system that allows for quick startups, even in cold conditions. The side-access chain tensioner simplifies chain adjustment, ensuring that the chain remains properly tightened without the need for additional tools.

Built for durability, the Echo CS-500P is constructed with high-quality materials, ensuring it can withstand the rigors of professional use. With its combination of power, efficiency, and innovative design, the Echo CS-500P chainsaw is an excellent choice for anyone in need of a reliable cutting tool, whether for occasional yard work or intensive forestry tasks. The Echo name is synonymous with quality, making this chainsaw a trusted companion for those who demand performance and dependability.
Top Page Image Contents