Echo CS-500P instruction manual Felling the Tree

Page 20

 

3 m (10 feet)

Direction of fall

Retreat

 

45°

45°

 

Retreat

Not this way

Direction of

fall

 

Hinge

 

5 cm (2 in.)

First cut

Felling cut

Notch

5 cm (2 in.)

Second cut

One-third tree diameter

3

1

2

FELLING THE TREE

A falling tree can seriously damage anything it may hit - a car, a house, a fence, a power-line, or another tree.

There are ways to make a tree fall where you want it, so first decide where that is!

Before cutting, clear the area around the tree. You will need good footing while working and you should be able to work the saw without hitting any obstacles.

Next, select a path of retreat.

When the tree begins to fall you should retreat away from the direction of fall at a 45-degree angle and at least 3 m (10 feet) from the trunk to avoid the trunk kicking back over the stump.

Begin the cut on the side to which the tree is to fall. Cut a notch about 1/3 of the way into the tree. The position of this notch is important since the tree will try to fall “into” the notch.

The felling cut is made on the side opposite the notch and at a level about 5 cm (2 in.) above the bottom of the notch.

Do not try to cut through to the notch with the felling cut.

The remaining wood between the notch cut and felling cut about 5 cm (2 in.) will act as a hinge when the tree falls, guiding it in the desired direction.

When the tree starts to fall, kill the engine, place the saw on the ground and make your retreat quickly.

To fell big trees with a diameter exceeding twice the bar length, start the notching cuts from one side and draw the saw through to the other side of the notch.

Start the back cut on one side of the tree, pivoting the saw through to form the desired hinge on that side.

Then remove the saw for the second cut. Insert the saw in the first cut, very carefully so as not to cause kickback.

The final cut is made by drawing the saw forward in the cut to reach the hinge.

CS-500P

18

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Chain SAW Copyright 2010 All Rights Reserved Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationOther Safety Precautions Contents Symbols and SignsSymbol Form DecalsPacking List Nomenclature of Parts Nomenclature of Parts Operator Safety Correct USE of Chain Brake Spark Arrestor MufflerGuide BAR and SAW Chain INSTALLATION/REMOVAL Preparation for USEAdjusting Chain Tension Fuel and Lubricant Fuel StatementEmission Control Emission DataHandling Fuel Operation Chain LubricantWhen the Engine is Cold When the Engine is WarmRunning StoppingChecking Chain Tension Chain Lubrication TestCutting Instruction GeneralFelling the Tree Limbing BuckingTesting the Brake Chain Brake OperationAutomatic Chain Brake Winter OperationSAW Chain Chain and Guide BAR CombinationGuide BAR Skill Levels Maintenance and CareMaintenance Intervals Carburetor Adjustment Cutting attachment must not move when unit is idlingAIR Filter Check Fuel SystmSpark Plug Fuel FilterSprocket Cylinder FinsMuffler Spark Arrestor Automatic OilerSetting the SAW Chain Setting SAW ChainCS-500P Troubleshooting Problem Cause RemedyTechnical Data Storage After USEWarranty Statements ExceptionsPurchased Repair PARTS, Short Blocks and Accessories MANUFACTURER’S Warranty Coverage

CS-500P specifications

The Echo CS-500P is a robust chainsaw designed for both professional landscapers and avid homeowners. Combining power, efficiency, and advanced technology, this chainsaw is ideal for cutting tasks ranging from light pruning to heavy-duty tree felling.

At the heart of the Echo CS-500P is a 50.2 cc professional-grade two-stroke engine that allows the chainsaw to deliver exceptional power. This engine technology not only ensures high performance but also optimizes fuel efficiency, enabling longer run times between refuels. The engine is designed to reduce emissions, complying with stringent environmental standards, making it an eco-friendlier option in its class.

The CS-500P features a high-quality 20-inch bar and chain, which provides excellent cutting capacity. The chain is designed for high performance, delivering smooth cuts while minimizing kickback—a vital feature that enhances operator safety. Additionally, it comes equipped with a centrifugal air cleaning system that removes larger dust and debris particles before they reach the air filter. This system significantly extends the life of the air filter and reduces maintenance needs, ensuring the chainsaw operates at peak performance for longer periods.

Another key feature of the Echo CS-500P is its ergonomic design. The chainsaw includes a lightweight design that balances power and portability, allowing for easy handling during extended use. The anti-vibration technology incorporated into the handle effectively reduces user fatigue, making it suitable for extensive cutting tasks.

Further enhancing the user experience is the easy-to-use starting system. The CS-500P features a mechanical ignition system that allows for quick startups, even in cold conditions. The side-access chain tensioner simplifies chain adjustment, ensuring that the chain remains properly tightened without the need for additional tools.

Built for durability, the Echo CS-500P is constructed with high-quality materials, ensuring it can withstand the rigors of professional use. With its combination of power, efficiency, and innovative design, the Echo CS-500P chainsaw is an excellent choice for anyone in need of a reliable cutting tool, whether for occasional yard work or intensive forestry tasks. The Echo name is synonymous with quality, making this chainsaw a trusted companion for those who demand performance and dependability.
Top Page Image Contents