Echo CS-500P instruction manual Limbing, Bucking

Page 21

Uphill position

Finish cut

First cut

Board or flat stones

LIMBING

Limbing a fallen tree is much the same as bucking.

Never stand on the tree that you are limbing.

When limbing, caution is the word.

Be careful of the tip touching other limbs.

Always use both hands.

Don’t cut with the saw overhead or aligned vertically with your body. If the saw should kickback, you may not have enough control to prevent possible injury.

BUCKING

Bucking is the sawing of a log or fallen tree into smaller pieces.

There are a few basic rules which apply to all bucking operations.

Keep both hands on the handles at all times. Support logs if possible.

When cutting on a slope or hillside, always stand uphill.

Keep in mind that the wood is heavy and that it will bend and pinch the saw if improperly supported. The trunk will weaken at the point where you make the cut unless the tree is lying on perfectly flat ground or supported as shown.

If you make the cut with the tree on the ground, don’t let the saw’s chain dig into the earth; it is harmful for the saw, and you stand a good chance of being struck by flying debris.

To cut the trunk, use the bucking and two-cut sequence shown.

The first cut should be no deeper than one-third the trunk diameter.

DANGER

•Kickback is generated when the rotation of the chain is arrested for some reason.

The most dangerous effect of this action occurs when the nose of the bar contacts another object, the chain is momentarily stopped and all the energy of the engine throws the bar upwards and backwards towards the operator.

•The chain saw industry and government agencies have attempted to prescribe various safety devices, but the best protection is to avoid kickback.

•Comply with the safety precautions as listed in this Manual and Safety Manual.

19

CS-500P

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Chain SAW Copyright 2010 All Rights Reserved Rules for Safe Operation Kickback Safety Precautions for Chain Saw UsersOther Safety Precautions Symbols and Signs ContentsDecals Symbol FormPacking List Nomenclature of Parts Nomenclature of Parts Operator Safety Spark Arrestor Muffler Correct USE of Chain BrakePreparation for USE Guide BAR and SAW Chain INSTALLATION/REMOVALAdjusting Chain Tension Fuel Statement Fuel and LubricantEmission Data Handling FuelEmission Control Chain Lubricant OperationWhen the Engine is Warm When the Engine is ColdStopping RunningChecking Chain Tension Chain Lubrication TestGeneral Cutting InstructionFelling the Tree Bucking LimbingChain Brake Operation Testing the BrakeWinter Operation Automatic Chain BrakeChain and Guide BAR Combination Guide BARSAW Chain Maintenance and Care Maintenance IntervalsSkill Levels Cutting attachment must not move when unit is idling Carburetor AdjustmentCheck Fuel Systm AIR FilterSpark Plug Fuel FilterCylinder Fins SprocketMuffler Spark Arrestor Automatic OilerSetting SAW Chain Setting the SAW ChainCS-500P Problem Cause Remedy TroubleshootingStorage After USE Technical DataExceptions Warranty StatementsPurchased Repair PARTS, Short Blocks and Accessories MANUFACTURER’S Warranty Coverage

CS-500P specifications

The Echo CS-500P is a robust chainsaw designed for both professional landscapers and avid homeowners. Combining power, efficiency, and advanced technology, this chainsaw is ideal for cutting tasks ranging from light pruning to heavy-duty tree felling.

At the heart of the Echo CS-500P is a 50.2 cc professional-grade two-stroke engine that allows the chainsaw to deliver exceptional power. This engine technology not only ensures high performance but also optimizes fuel efficiency, enabling longer run times between refuels. The engine is designed to reduce emissions, complying with stringent environmental standards, making it an eco-friendlier option in its class.

The CS-500P features a high-quality 20-inch bar and chain, which provides excellent cutting capacity. The chain is designed for high performance, delivering smooth cuts while minimizing kickback—a vital feature that enhances operator safety. Additionally, it comes equipped with a centrifugal air cleaning system that removes larger dust and debris particles before they reach the air filter. This system significantly extends the life of the air filter and reduces maintenance needs, ensuring the chainsaw operates at peak performance for longer periods.

Another key feature of the Echo CS-500P is its ergonomic design. The chainsaw includes a lightweight design that balances power and portability, allowing for easy handling during extended use. The anti-vibration technology incorporated into the handle effectively reduces user fatigue, making it suitable for extensive cutting tasks.

Further enhancing the user experience is the easy-to-use starting system. The CS-500P features a mechanical ignition system that allows for quick startups, even in cold conditions. The side-access chain tensioner simplifies chain adjustment, ensuring that the chain remains properly tightened without the need for additional tools.

Built for durability, the Echo CS-500P is constructed with high-quality materials, ensuring it can withstand the rigors of professional use. With its combination of power, efficiency, and innovative design, the Echo CS-500P chainsaw is an excellent choice for anyone in need of a reliable cutting tool, whether for occasional yard work or intensive forestry tasks. The Echo name is synonymous with quality, making this chainsaw a trusted companion for those who demand performance and dependability.
Top Page Image Contents