Echo CS-500P instruction manual Emission Data, Handling Fuel, Emission Control

Page 15

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT!

•NEVER refuel a unit with the engine running.

•DO NOT fill fuel tanks indoors.

ALWAYS fill fuel tanks outdoors over bare ground.

•Securely tighten fuel cap after refueling.

•Inspect for fuel leakage.

If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3 m (10 feet) from refueling location before starting the engine.

HANDLING FUEL

MIXING INSTRUCTIONS -

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of two-stroke oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT

•Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage.

•Stored fuel ages.

Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added.

•Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use.

AFTER USE -

DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

STORAGE -

Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building, away from sparks and flames.

EMISSION DATA

EMISSION CONTROL

(EXHAUST and EVAPORATIVE) EPA 2010 and/ or C.A.R.B. TIER III

The emission control system for the engine is EM/ TWC (Engine Modification and 3-way Catalyst) and for the fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to California models only.

An Emission Control Label is located on the engine. (This is an example only, information on label varies by engine family).

PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)

The 300 hours emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.

E M I S S I O N C O N T R O L I N F O R M A T I O N ENGINE FAMILY: #EHXS.0505RC DISPLACEMENT: 50.2cc EMISSION COMPLIANCE PERIOD: 300Hours

THIS ENGINE MEETS U.S.EPA EXH REGS FOR MODEL YEAR * * * *

REFER TO OWNER’S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.

* * * ????

13

CS-500P

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Chain SAW Copyright 2010 All Rights Reserved Rules for Safe Operation Kickback Safety Precautions for Chain Saw UsersOther Safety Precautions Symbols and Signs ContentsDecals Symbol FormPacking List Nomenclature of Parts Nomenclature of Parts Operator Safety Spark Arrestor Muffler Correct USE of Chain BrakePreparation for USE Guide BAR and SAW Chain INSTALLATION/REMOVALAdjusting Chain Tension Fuel Statement Fuel and LubricantEmission Data Handling FuelEmission Control Chain Lubricant OperationWhen the Engine is Warm When the Engine is ColdChain Lubrication Test RunningStopping Checking Chain TensionGeneral Cutting InstructionFelling the Tree Bucking LimbingChain Brake Operation Testing the BrakeWinter Operation Automatic Chain BrakeChain and Guide BAR Combination Guide BARSAW Chain Maintenance and Care Maintenance IntervalsSkill Levels Cutting attachment must not move when unit is idling Carburetor AdjustmentFuel Filter AIR FilterCheck Fuel Systm Spark PlugAutomatic Oiler SprocketCylinder Fins Muffler Spark ArrestorSetting SAW Chain Setting the SAW ChainCS-500P Problem Cause Remedy TroubleshootingStorage After USE Technical DataExceptions Warranty StatementsPurchased Repair PARTS, Short Blocks and Accessories MANUFACTURER’S Warranty Coverage

CS-500P specifications

The Echo CS-500P is a robust chainsaw designed for both professional landscapers and avid homeowners. Combining power, efficiency, and advanced technology, this chainsaw is ideal for cutting tasks ranging from light pruning to heavy-duty tree felling.

At the heart of the Echo CS-500P is a 50.2 cc professional-grade two-stroke engine that allows the chainsaw to deliver exceptional power. This engine technology not only ensures high performance but also optimizes fuel efficiency, enabling longer run times between refuels. The engine is designed to reduce emissions, complying with stringent environmental standards, making it an eco-friendlier option in its class.

The CS-500P features a high-quality 20-inch bar and chain, which provides excellent cutting capacity. The chain is designed for high performance, delivering smooth cuts while minimizing kickback—a vital feature that enhances operator safety. Additionally, it comes equipped with a centrifugal air cleaning system that removes larger dust and debris particles before they reach the air filter. This system significantly extends the life of the air filter and reduces maintenance needs, ensuring the chainsaw operates at peak performance for longer periods.

Another key feature of the Echo CS-500P is its ergonomic design. The chainsaw includes a lightweight design that balances power and portability, allowing for easy handling during extended use. The anti-vibration technology incorporated into the handle effectively reduces user fatigue, making it suitable for extensive cutting tasks.

Further enhancing the user experience is the easy-to-use starting system. The CS-500P features a mechanical ignition system that allows for quick startups, even in cold conditions. The side-access chain tensioner simplifies chain adjustment, ensuring that the chain remains properly tightened without the need for additional tools.

Built for durability, the Echo CS-500P is constructed with high-quality materials, ensuring it can withstand the rigors of professional use. With its combination of power, efficiency, and innovative design, the Echo CS-500P chainsaw is an excellent choice for anyone in need of a reliable cutting tool, whether for occasional yard work or intensive forestry tasks. The Echo name is synonymous with quality, making this chainsaw a trusted companion for those who demand performance and dependability.
Top Page Image Contents