Dixon 52 - 27 KOH, 60 - 27 KOH, 60 - 30 KOH, 72 - 27 KOH manual Operation Instructions

Page 27

OPERATION INSTRUCTIONS

MOWER DECK CUT HEIGHT LIFT LEVER

The lifting lever is used to place the mower deck in the transport position or one of the 18 different cutting heights.

The cutting height is set by placing a peg in the hole for the desired cutting height and the peg is then locked on the inside with the supplied pin.

1.To set the deck in the transport position, squeeze the underpin upwards to the lift handle and pull

the lever backward to the locked position (raised).

2.To set the deck for mowing, select the desired mowing height and place the lock pin into the matching hole. Secure on the inside with hairpin cotter. Squeeze the underpin upwards to the lift handle and push the lever forward to the lock pin. Release the lift handle.

3.The lift lever can also be

used to temporarily adjust the cutting height, such as when passing a minor bump in the lawn.

27

Image 27

Contents Operator’s Manual Page Important Read Carefully Page Table of Contents Safety Safety Alert Symbol General Operation General Operation Slope Operation Slope Operation Roll Over Protection System Rops Owner/operator responsibilities Fire Hazards Fire Hazards CHILDREN, Bystanders and Pets Service Dixon Warrants ITS ZTR Mowers Against Defects in Material Specifications Specifications Specifications Specifications Seat Adjustment Instructions Control Levers ControlsTo SET Park Brake Park BrakeChoke and Throttle Control Lever Blade DriveMower Deck CUT Height Lift Lever Operation InstructionsBefore Operating Mower Starting Instructions Testing of Safety Interlock Systems Park Brake Switch TestControl Lever Switch Test Seat Switch Test Blade Drive Switch TestMowing with a Mulching Attachment CUT High MOW Often Mowing with a Grass Catcher Attachment Grass Catcher Attachment Mowing with aSide Discharge of the Clippings Grass Typ es Best Cut Heig hts Grass Height and Cutting SuggestionsTo Free Wheel Machine Towing Trailers Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance Belts EngineBelt Tension OFF Season Battery Storage BatteryLubrication TiresOIL Fill Changing the Engine OILHydrostatic Transmission Fluid Filter Service Service IntervalsMaintenance Procedure Mower Deck Leveling Procedure Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEStandard Service Parts List BladesEngine AIR and OIL Filters Troubleshooting Engine Runs but Mower WON’T Move Forward Date Engine Tuned OWNER’S InformationDixon and ZTR Are registered trademarks