Dixon 6601 Series manual Care and Maintenance, Maintenance Schedule

Page 22

CARE AND MAINTENANCE

This portion of the Model ZTR 6601 owners manual deals with normal service items which can be performed by the owner. Please remember that if you are in doubt as to the correct service procedures to be followed, these and other service situations can be handled by a Dixon ZTR dealer who is familiar with the service of your mower.

MAINTENANCE SCHEDULE:

To insure a long and trouble free service life on all the components used on the Model ZTR 6601 a regular and thorough maintenance schedule should be followed. The following items should be checked after the first (10) hours of operation and on a weekly basis, or each (40) hours of use: (Items marked with an asterisk * require more frequent attention)

1.Drive system, belts and controls.

2.Mower deck belts.

3.Tire pressures.

4.HydroGear oil tank.

5.Tightness of all nuts and bolts.

6.Battery fluid level.

7.* Engine oil. (Before each use or every 8 hours)

8.Electric blade clutch air gap setting.

CAUTION

Before performing any maintenance, shut off engine, allow to cool.

ENGINE: For engine operating and maintenance information, refer to the engine operating and maintenance instructions furnished by the engine manufacturer, supplied with each mower.

BATTERY: Check the fluid in the battery at frequent intervals.

Keep fluid level above the plates in each cell, using distilled water.

OFF-SEASON BATTERY STORAGE:

Identify each cable so cables can be reconnected to correct terminals.

Disconnect cables from terminals.

ALWAYS disconnect ground cable first and reconnect last.

Charge battery.

DO NOT remove battery from mower.

Clean top of battery and terminals with baking soda and water.

Page 19

Image 22
Contents Page Important Read Carefully Index Safety Safety Symbols Safety Alert SymbolSafety Do not Children Service Dixon Limited Warranty Policy -- HYDRO-GEAR Models Specifications Seat Adjustment Instructions Controls To SET Parking Brake Parking BrakeHYDRO-GEAR Drive System Turning To GO ForwardTo GO Backward BrakingMower Deck CUT Height Lift Lever Circuit BreakerBlade Drive Operation Instructions Operation Instructions Starting Instructions Cold Engine Always turn engine off when leaving mower Grass Height Suggestions Care and Maintenance Maintenance ScheduleCutter Blade Maintenance Belt Tension Fuel Shut OFF Valve LubricationRear Wheels Feel uneasy on it, do not mow itImportant Protect your investment OIL Fill Changing the Engine OILProtect Your Investment Deck Leveling and Height Adjusting Procedure Drive System Adjustments Parking Brake Cable Adjustment Neutral Adjustment Forward Travel Speed Adjustments AIR GAP Adjustment Procedure for Electric Clutch AdjustmentOhms Test Hydrostatic Transmission OIL and Filter Service Care and Maintenance Model ZTR Kohler AIR and OIL Filter Part NumbersMower CUT Quality Situation Causes RemedyTroubleshooting Drive SystemElectrical System Page Page Page Page Page Page Page Page Information September