Dixon 13089-0601 manual Specifications, Model ZTR

	SPECIFICATIONS
	Model ZTR 5023
CHASSIS:	11 GA - rectangular tube
BODY:	Two piece - made of high-density polyethylene. Front body contains
	access panels for battery service and engine to mower deck belt
	removal. Rear body tilts up to allow service on the entire drive
	system.
SEAT:	Designed for operator comfort by use of high density closed cell
	foam padded back and arm rests, upholstered with CorduraTM
	water-repellent fabric. Seat is adjustable fore and aft.
MOWER DECK:	Two decks are available. The 60" is made of stamped steel. The
	50" is made of 11 GA fabricated welded construction with external
	reinforcement ribs. Three blades combine for a 50" or 60" cut
	width. Cut height approximately 1.5" to 4.5" via 7 position lift
	handle.
BLADE DRIVE:	Electric clutch
DRIVE SYSTEM:	Each rear wheel is independently driven by a HydroGear BDU-10L
	Series 70 hydrostatic transmission.The hydrostatic
	transmissions, in turn, power a fully enclosed HydroGear gearbox.
ENGINE:	23HP Kohler Command, 4-Cycle, V-Configuration, Overhead Valve,
	Air-Cooled, Gasoline, Vertical Shaft, Aluminum Head, and Crankcase
	with Cast Iron Liners, Full Pressure Lubrication/Full Flow Filter,
	Pulse-type Fuel Pump, Fixed Jet Carburetor w/Smart-Choke,
	Electronic Ignition, In-Line Fuel Filter, Dual Element Air Cleaner.
STARTING SYSTEM:	Electric by key switch operation with safety interlocks on parking
	brake and blade drive clutch.
TIRES:	Front	11 X 4-5 Ribbed Tread
	Rear	20 X 10-8 Multi Trac
RECOMMENDED	Front	16 - 21 lbs.
TIRE PRESSURE:	Rear	8 - 14 lbs.
CAPACITIES:	Fuel - 4.8 gallons total (dual tanks)
	Hydrostat oil tank - 3 quart with in-line 40 micron filter
	Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS:	Width	60"(50" Deck), 72"(60" Deck)
	Height	45"
	Length	72"
	Weight	680 lbs.(50" Deck), 685 lbs.(60" Deck)

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTIFICATION

14