Dixon 13089-0601 manual BOX to Hydrostat Belt Adjustment

Page 47

CARE AND MAINTENANCE

Adjustment of the drive system is limited to the actual function of the hydrostatic transmissions as outlined below.

T-BOX TO HYDROSTAT BELT ADJUSTMENT:

Tighten the (2) J-bolts on the T-box mounting plate until each belt has 1/8th to 1/4th” of free play or move- ment at a mid-point between the pulleys on the hydrostats and T-Box.

Each hydrostat has a bypass relief pin located at the rear of the hydrostatic unit. A bypass keeper is provided to allow the mower to be rolled around without engine running. To accomplish this, the bypass keeper spring must be positioned to depress the bypass relief pins. Remove bypass keeper springs prior to actual operation of the mower.

47

Image 47
Contents OPERATOR’S Manual Important Read Carefully Index Safety Safety Alert Symbol General Operation General Operation Do not mow it Slope OperationNever allow children to operate the mower ChildrenService Service Dixon Limited Warranty Policy Estate Models Specifications Model ZTR SpecificationsSeries Models Seat Adjustment InstructionsControl Levers ControlsThrottle Control Lever Choke Control LeverHydro Gear System Parking BrakeMower Deck CUT Height Lift Lever Blade DriveCircuit Breaker To Freewheel Machine Unlock Transmission Towing Operation InstructionsBefore Operating Mower Testing of Safety Interlock Systems Side Discharge of the Clippings Grass Height and Cutting Suggestions Starting Instructions engine has been operated Starting Instructions cold engine Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Deck Rollers 60 deck Maintenance Schedule Care and MaintenanceTires BatteryEngine Cutter Blade Maintenance Belt Tension BeltsLubrication Fuel Shut OFF ValveChanging the Engine OIL OIL Filters OIL FillHydrostatic Transmission OIL & Filter Service Hydrostatic Transmission OIL & Filter Service Service Intervals Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEMower Deck Leveling Procedure Mower Deck Leveling Procedure Mower Deck Removal BOX to Hydrostat Belt Adjustment Parking Brake Cable Adjustment Wheel Reversal Rear WheelsNeutral Adjustment Neutral Adjustment AIR GAP Adjustment Procedure for Electric Clutch AdjustmentOhms Test Forward Travel Speed Adjustment Deck Standard Service Parts ListTroubleshooting Engine Runs but Mower WON’T Move Forward Page Owner Information ZTRMowers