2004 Bay Collection
Owner’s Manual
Control Panel Reset
This function is used to completely reset the clock and all other system variables to the factory defaults. Please keep in mind that this resets all maintenance messages (clean filters, change water, etc.) as if the hot tub is being installed the day of the panel reset. To reset the control system all of the following buttons must be pushed within 3 seconds:
1.Push the ICON (logo) Button
2.Push the ENTER Button
3.Push the PROGRAM Button
The top line of the Digital Display Window will read “RESET PROGRAMMING?” The bottom line of the Digital Display Window will read “IF SO, PUSH ICON”
4.Push the Dimension One ICON Button to reset the entire control system to factory defaults or do not touch a button for 10 seconds to exit.
Dynamic Massage Sequencer
The Dynamic Massage Sequencer is located in the Ultra Lounge of the models mentioned above. The sequencer directs a succession of 14 jets to six separate muscle groups.
When a sequence is chosen, a human figure with LED's defining each zone, will light, showing the active zones in that sequence. This allows you to preview the zones in the sequence before a selection is confirmed.
Control Panel Description
LIGHT Button | The LIGHT Button is used to turn the spa light on or off. The status light below |
| the button will illuminate when the light is on. The spa light may be turned on/off |
| with this button, or the one on the Top Side Control. They work interchangeably. |
35