2004 Bay Collection
Owner’s Manual
iWatch Perimeter Lighting
The iWatch is a
The iWatch Master Control Module provides:
•Green Status Light to indicate the spa is functioning normally (steady green), or requires scheduled maintenance (flashing green)
•Red Status Light to indicate the spa requires service
•9 colorful LED lights (3 Red, 3 Green, and 3 Blue) to provide perimeter lighting
•Push button control of perimeter lighting
•Connection for up to three optional Auxiliary Modules to provide additional perimeter lighting
•Photo sensor for automatically activating the perimeter lighting at night and deactivating it at sunrise.
•Palm pilot infrared interface port
•Receiver sensor for the
The iWatch Master Control Module is capable of supporting up to three Auxiliary Modules to provide additional skirt lighting on as many additional sides as desired.
In addition, the iWatch Master Control Module provides infrared support for optional Palm Pilot and Remote Control access. These items are available from your local Dimension One Spas Inc. dealer.
Water Drop Button
The “Water Drop Button” is used to control the perimeter lighting. Pressing it causes the perimeter lighting to step through various lighting sequences.
Photo Sensor
A sensor mounted in the module senses the outside light. When it is dark, the perimeter light will be turned on. The perimeter light will be turned off when it is light.
Green Status Light
This light is always “ON” and indicates that the spa has power. A flashing Green Status Light indicates that the spa requires scheduled maintenance. The Scrolling Message Center will tell you what maintenance activity is required. If the Green Status Light continues to flash after you have performed the scheduled maintenance, you should call your dealer.
Red Status Light
The Red Status Light will be “OFF” when the spa is functioning normally. When service is required, this light is turned “ON” and produces a solid RED light. Contact your local Dimension One Spas dealer to obtain service.
45