Installing Blower Accessory Fireplace Systems

INSTALLING BLOWER ACCESSORY IN MODEL SVFBC FREESTANDING STOVE INSTALLING BLOWER ACCESSORY IN 32" FIREPLACE SYSTEMS

INSTALLING BLOWER ACCESSORY IN MODEL SVFBC FREESTANDING STOVE

Continued

5.Attach the power cord to the blower motor by firmly pushing the two female terminals at the end of the power cord onto the two spade terminals on the blower motor.

6.Attach green ground wire from power cord to blower housing using screw provided (see Figure 16). Tighten screws securely.

7.Place the blower on the mounting bracket with the exhaust port directed upward. Align the holes in blower frame with holes in bracket (see Figure 16). Using 4 screws provided mount blower and tighten each screw.

8.Be certain that all wire terminals are securely attached to ter- minals on blower motor and that the screw retaining the green ground wire is tight.

9.Reattach motor mounting bracket using screws removed in step 1, page 5.

10.Plug in power cord. This blower is supplied with a 3-prong, grounding plug. It must be plugged into a standard 3-prong grounded wall outlet near the stove.

11.Check to make sure that the power cord is completely clear of the blower wheel and that there are no other foreign objects in blower wheel. Turn blower on and check for operation. Turn blower off by rotating knob fully counter-clockwise before continuing.

CAUTION: Never touch the blower wheel while in operation.

12.Peel off the backing paper and stick the supplied wiring dia- gram decal on the back of the blower mounting bracket (see Figure 13, page 5).

Note: Discard the remaining hardware items.

Exhaust Port

Screws

Blower

Ground	Mounting
Wire	Bracket

Figure 16 - Attaching Blower to Mounting Bracket

OPERATING THE BLOWER

Lightyourgasappliancewiththebloweroff.Afterabout15minutes,turn the blower on to deliver heated air at the top louvers. The blower features a variable control which allows you to select the speed you desire.

INSTALLING BLOWER

ACCESSORY IN 32"

FIREPLACE SYSTEMS

NOTICE: Shut off gas supply and disconnect heater from gas supply. Contact a qualified service person to do this.

Note: Appearance of firebox or burner system may vary depending on model.

1.Remove fireplace screen per the instructions in operation manual supplied with fireplace.

2.If logs are installed, carefully remove the logs and set aside, noting the properly mounted location of each.

3.Remove screws that attach log base assembly to fireplace. Care- fully lift up log base assembly and remove from fireplace, tak- ing care to pull flexible gas line through the access holes (see Figure 17).

CAUTION: Do not pick up log base assembly by burners. This could damage burners. Only handle base by grates.

4.Attach the power cord to the blower motor by firmly pushing the two female terminals at the end of the power cord onto the two spade terminals on the blower motor.

5.Attach green ground wire from power cord to blower housing us- ing screw provided (see Figure 18). Tighten screws securely.

Flexible

Gas Line

Screws

Log Base

Figure 17 - Removing Log Base from Fireplace

Exhaust Port	Top Mounting Tab	Lower Rear
	Top Mounting Tab	Wall of
		Firebox

Screw

Green

Ground Wire

ScrewsBlower

Figure 18 - Mounting Blower to Firebox

For morevisit www..com

108319-01B

Ga3750a specifications

Desa GA3750A is a state-of-the-art technological solution designed for enhanced gas management in various applications. Built with user-friendly features and advanced mechanics, the GA3750A stands out in the market for its efficiency and reliability.

One of the main features of the Desa GA3750A is its efficient gas control mechanism. It is equipped with a high-precision pressure regulator that ensures stable and consistent gas flow. This mechanism is essential for applications requiring precise gas consumption, such as industrial processes and commercial kitchens. It minimizes wastage while maximizing performance efficiency.

The GA3750A utilizes cutting-edge materials, ensuring durability and longevity. Its corrosion-resistant construction not only prolongs the lifespan of the device but also makes it suitable for use in harsh environments. Whether in high-humidity areas or exposed to corrosive substances, the GA3750A maintains its integrity, delivering reliable service over time.

In terms of technology, the GA3750A incorporates smart monitoring systems that provide real-time data on gas usage. This feature allows users to track consumption patterns, offering insights that can lead to optimized operations and cost savings. The integration of IoT connectivity means that this device can be easily connected to advanced monitoring systems, enabling remote access and control.

Moreover, safety is prioritized in the design of the GA3750A. Equipped with multi-layer safety features, it includes automatic shut-off valves and leak detection sensors. In the event of a malfunction or detected leak, these safety measures activate to prevent potential hazards, ensuring that users can operate with peace of mind.

The GA3750A is also designed for ease of installation and maintenance. Its modular construction facilitates simple setup, and the components can be easily accessed for routine checks or repairs. This consideration for user convenience significantly reduces downtime and maintenance costs.

Overall, the Desa GA3750A embodies a blend of advanced technology and practical features, making it an essential tool for gas management in industrial and commercial settings. With its focus on efficiency, durability, and safety, the GA3750A is a market leader that meets the demands of modern applications effectively.