BLADE CARE
For best results, mower blade must be kept sharp. Replace bent or damaged blades.
CLEANING
•Release Operator Presence Control Switch to turn mower off, wait for the blade to stop, and unplug mower!
•Turn off, let the blade come to a stop and then unplug mower!
•Use only mild soap and a damp cloth to clean the mower. Clean out any clippings which may have accumulated on the underside of the deck.
PREVENTING CORROSION
•Fertilizers and other garden chemicals contain agents which greatly accelerate the corrosion of metals. If you mow in areas where fertilizers or chemicals have been used, the mower should be cleaned immediately after use.
•
CAUTION: DO NOT pour or spray water on the mower.
•Do not store the tool on or adjacent to fertilizers or chemicals. Such storage can cause rapid corrosion.
PRODUCT SPECIFICATIONS
MODEL NUMBER | 900.370510 |
POWER | 120v 12 Amp |
BLADE SPEED | 3600 RPM |
CUTTING WIDTH | 19'' |
|
|
BLADE BOLT TORQUE: |
SERVICE AND ADJUSTMENTS
CAUTION: Before performing any ser- vice or adjustments:
•Release operator presence control switch and stop motor.
•Make sure the blade and all moving parts have completely stopped.
•Unplug power cord.
REAR DEFLECTOR
The rear deflector, attached between the
rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If the deflector becomes damaged, it should be replaced.
TO ADJUST CUTTING HEIGHT
To adjust cutting height refer to “Adjust Cutting Height” in Operation section of this manual.
STORAGE
Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more.
LAWN MOWER
When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.
•Clean entire lawn mower (See “CLEANING” in the Maintenance section of this manual).
•Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect
moving parts for damage, breakage and wear. Replace if necessary.
HANDLE
You can fold your lawn mower handle for storage.
•Ensure that the power cord has been unplugged.
•Loosen both handle knobs.
•Carefully fold the handle forward over
the mower.
CAUTION: DO NOT pinch cord between handle and mower shroud.
13