TO FREE A JAMMED FLYWHEEL
•Stop the engine.
•Remove the spark plug wire and keep away from the spark plug.
•Disconnect battery at negative terminal (if so equipped).
•Remove any material left in the chipper hopper.
•Remove the deflector.
NOTE: Never pry against the scroll weldment when removing the deflector or at any other time. This will cause damage to the machine.
•Check to see if deflector is clogged. If it is, clear with a branch.
•With a wooden stick, loosen and remove any material left in the chipping chamber.
•Reinstall the deflector.
•Reconnect the spark plug wire and battery (if so equipped).
•Start machine and let material in chipping chamber discharge through deflector.
•If chamber doesn’t clear and the flywheel is still jammed, repeat above process.
•Be certain chipping chamber is clear before trying to process more material into the chipper.
18