PRE-START Instructions

12.Guard Bar (73): Always place the Guard Bar Cover (78) on the Guard Bar when transporting or storing the Polesaw/Pruner. The Guard Bar Cover fits snugly onto the Guard Bar and must be attached carefully due to the sharp teeth of the Saw Chain (74). Always wear heavy duty work gloves when installing the Guard Bar Cover. (See Figure B.)

13.Oil Tank (69): Refer to the “Pre-Start Instructions” section in this manual for full details. (See Figure B.)

14.Gear Box Grease Fitting (50): The Drive Gear (44) assembly should be filled (through the Gear Box Grease Fitting) with clean, new, automotive axle grease every three months or 50 hours of tool use. (See Figure B.)

15.Spark Plug (55A): The condition of the Spark Plug should be checked every six months or 100 hours of tool use. If necessary, clean or replace the Spark Plug. ALWAYS remove the Spark Plug prior to performing any inspection, maintenance, or cleaning of the Polesaw/Pruner. (See Figure B.)

16.Choke Lever (48A): The Choke Lever must be set to its “START” position when starting a cold Engine (1). Once started, move the Choke Lever to its “RUN” position. When starting a warm Engine, make sure the Choke Lever is in its “RUN” position. (See Figure B.)

17.Air Filter (42A): The Air Filter should be checked prior to each use of the Polesaw/Pruner for excessive dirt and debris build-up. Thereafter, the Air Filter should be cleaned or replaced every three months or 50 hours of tool use.

(See Figure B.)

18.Fuel Tank (78A): The Fuel Tank will hold up to 0.2 gallon of fuel. Always make sure the Fuel Cap (74A) is securely replaced after filling the Fuel Tank. NEVER attempt to fill the Fuel Tank when the Engine (1) is running or hot to the touch.

Refer to the “Pre-Start Instructions” section in this manual for full details on filling the Fuel Tank with the proper unleaded fuel/2-cycle oil mixture.

(See Figure B.)

19.Starter Handle (4A): Refer to the “To Start The Polesaw/Pruner” section in this manual for full details. (See Figure B.)

To Fill The Chain Oil Tank:

1.Prior to each use of the Polesaw/Pruner, the Chain Oil Tank (69) must be filled with S.A.E. 30 weight oil (below 34o Fahrenheit) or S.A.E. 40 weight oil (above 75o Fahrenheit). (See Figure B.)

SKU 95283

For technical questions, please call 1-800-444-3353

PAGE 11

95283 specifications

The Chicago Electric 95283 is a versatile and robust tool that has gained a reputation for its performance and reliability among DIY enthusiasts and professional tradespeople alike. This compact bench top band saw is designed to handle a variety of cutting tasks, making it a valuable addition to any workshop or home garage.

One of the standout features of the Chicago Electric 95283 is its powerful motor. Equipped with a 1.5 horsepower motor, this band saw delivers strong cutting performance, allowing users to effortlessly cut through various materials including wood, plastic, and even soft metals. The motor operates quietly, which enhances the user experience during long cutting sessions.

In terms of design, the Chicago Electric 95283 boasts a sturdy, all-steel construction that ensures durability and stability. The frame is designed to minimize vibrations, which enhances precision during operation. The saw table is spacious and can be adjusted to an angle for accurate bevel cuts, allowing users to perform more complex cutting tasks with ease.

The band saw features a user-friendly blade tracking adjustment knob, which helps maintain the tension and alignment of the blade. This tool is compatible with a variety of blade widths, enabling users to choose the best blade for their specific cutting needs. The saw also includes a blade guard, ensuring user safety while operating the tool.

Another significant characteristic of the Chicago Electric 95283 is its portability. Despite its robust construction, the band saw is relatively lightweight, making it easy to move around the workshop or take on job sites. This feature is particularly beneficial for contractors who require mobility without compromising on power.

In summary, the Chicago Electric 95283 stands out for its combination of power, precision, and portability. Whether tackling woodworking projects or metalworking tasks, this versatile band saw offers the performance needed to achieve professional-quality results. Its durable construction, user-friendly features, and adjustable capabilities make it an excellent choice for both novices and experienced craftsmen. As the DIY community continues to grow, tools like the Chicago Electric 95283 will play a crucial role in empowering individuals to bring their creative visions to life.