Chicago Electric 95283 warranty Troubleshooting, Please Read the Following Carefully

Page 17

TROUBLESHOOTING

 

 

 

 

 

Problem

 

Possible Cause

 

Possible Solution

Guard Bar and Chain running hot and

1.

Chain tension too tight.

1.

Re-adjust Chain Tension Adjusting Screw to

smoking.

 

 

 

lesson tension on Chain.

 

2.

Chain Oil Tank empty.

2.

Refill Chain Oil Tank.

Engine runs, but Chain is not rotating.

1.

Chain tension too tight.

1.

Re-adjust Chain Tension Adjusting Screw to

 

 

 

 

lesson tension on Chain.

 

2.

Damaged Guard Bar and/or

2.

Have a qualified service technician repair or

 

 

Chain.

 

replace Guard Bar and/or Chain.

Chain rotates while Engine is at idle.

1.

Engine idle speed set too

1.

Have a qualified service technician reset

 

 

high.

 

Carburetor idle adjustment Screw to lower

 

 

 

 

idle (RPM) speed.

Power Switch does not turn off

1.

Defective Power Switch.

1.

Immediately remove Spark Plug Cap from Spark

Engine.

 

 

 

Plug to stop Engine. Discontinue using Polesaw/

 

 

 

 

Pruner until the tool is repaired by a qualified

 

 

 

 

service technician.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

SKU 95283

For technical questions, please call 1-800-444-3353

PAGE 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Your Warranty Is Voided If GAS Powered POLESAW/PRUNERGeneral Safety Rules and Precautions Product SpecificationsSave this Manual Work AreaSKU For technical questions, please call Personal SafetyIMPORTANT! Your Warranty is voided if Specific Safety Rules and PrecautionsKickback Precautions Fire and Explosion Precautions Electrical PrecautionsCarbon Monixide Precautions Chemical Precautions Mechanical PrecautionsNoise Precautions Use only Engine manufacturer recommended fuel and oilAssembly Instructions MISC. Precautions UnpackingSee Figure B Product FeaturesSee Figure B To Fill The Chain Oil Tank PRE-START InstructionsTo Fill The Fuel Tank Operating InstructionsTo Stop The Polesaw/Pruner Figure D INSPECTION, MAINTENANCE, and Cleaning Figure C Please Read the Following Carefully TroubleshootingDescription Parts List POLESAW/PRUNER UnitHex Wrenches not shown Assembly Diagram POLESAW/PRUNER UnitDescription Parts List EngineAssembly Diagram -ENGINE Emission Control System Warranty Warranted Parts Warranty

95283 specifications

The Chicago Electric 95283 is a versatile and robust tool that has gained a reputation for its performance and reliability among DIY enthusiasts and professional tradespeople alike. This compact bench top band saw is designed to handle a variety of cutting tasks, making it a valuable addition to any workshop or home garage.

One of the standout features of the Chicago Electric 95283 is its powerful motor. Equipped with a 1.5 horsepower motor, this band saw delivers strong cutting performance, allowing users to effortlessly cut through various materials including wood, plastic, and even soft metals. The motor operates quietly, which enhances the user experience during long cutting sessions.

In terms of design, the Chicago Electric 95283 boasts a sturdy, all-steel construction that ensures durability and stability. The frame is designed to minimize vibrations, which enhances precision during operation. The saw table is spacious and can be adjusted to an angle for accurate bevel cuts, allowing users to perform more complex cutting tasks with ease.

The band saw features a user-friendly blade tracking adjustment knob, which helps maintain the tension and alignment of the blade. This tool is compatible with a variety of blade widths, enabling users to choose the best blade for their specific cutting needs. The saw also includes a blade guard, ensuring user safety while operating the tool.

Another significant characteristic of the Chicago Electric 95283 is its portability. Despite its robust construction, the band saw is relatively lightweight, making it easy to move around the workshop or take on job sites. This feature is particularly beneficial for contractors who require mobility without compromising on power.

In summary, the Chicago Electric 95283 stands out for its combination of power, precision, and portability. Whether tackling woodworking projects or metalworking tasks, this versatile band saw offers the performance needed to achieve professional-quality results. Its durable construction, user-friendly features, and adjustable capabilities make it an excellent choice for both novices and experienced craftsmen. As the DIY community continues to grow, tools like the Chicago Electric 95283 will play a crucial role in empowering individuals to bring their creative visions to life.
Top Page Image Contents