Chicago Electric 95283 warranty To Stop The Polesaw/Pruner

Page 13

5.With your index finger, pressed firmly on the Primer (87A) three or four times.

(See Figure B.)

6.Turn the Power Switch (10) to its “ON” position. (See Figure B.)

7.Squeeze the Throttle Lever (8). (See Figure B.)

8.Hold the Bottom Pipe Support (2) with your left hand, and place your right foot on the rear section of the Engine (1). Firmly press the Polesaw/Pruner to the ground, making sure the Saw Chain (74) does not come in contact with any objects on the ground. (See Figure B.)

9.Hold the Starter Handle (4A) securely, and slowly pull out the Starter Rope (7A) for a short distance. Then, pull out the Starter Rope quickly. (See Figure B.)

10.If the Engine (1) does not start, press the Primer (87A) again and attempt to start the Engine. (See Figure B.)

11.If the Engine (1) runs for a short while, but does not continue running, press the Primer (87A) again. Move the Choke Lever (48A) to its “RUN” position and restart the Engine. (See Figure B.)

12.As soon as the Engine (1) is running, check to make sure the Choke Lever (48A) is in its “RUN” position. Squeeze the Throttle Lever (8) briefly and let up. The Throttle Lever will revert to its original position, causing the Engine to idle.

(See Figure B.)

13.NOTE: If the Engine (1) is new, or has been stored for a long period of time, pull the Starter Handle (4A) several times to ensure sufficient fuel is delivered into the fuel line and combustion chamber of the Engine. (See Figure B.)

14. WARNING! The Saw Chain (74) should never turn at idle. If necessary, turn the Idle Screw of the Carburetor counterclockwise to reduce the idle RPM and stop the Chain, or immediately discontinue using the Polesaw/Pruner and contact a qualified service technician to make the adjustment.

To Stop The Polesaw/Pruner:

1.Let up on the Throttle Lever (8). Then turn the Power Switch (10) to its “OFF” position. (See Figure B.)

To Operate The Polesaw/Pruner:

1.Maintain a proper grip on the Polesaw/Pruner whenever the Engine (1) is

SKU 95283 For technical questions, please call 1-800-444-3353 PAGE 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Your Warranty Is Voided If GAS Powered POLESAW/PRUNERGeneral Safety Rules and Precautions Product SpecificationsSave this Manual Work AreaSKU For technical questions, please call Personal SafetyIMPORTANT! Your Warranty is voided if Specific Safety Rules and PrecautionsKickback Precautions Carbon Monixide Precautions Electrical PrecautionsFire and Explosion Precautions Chemical Precautions Mechanical PrecautionsNoise Precautions Use only Engine manufacturer recommended fuel and oilAssembly Instructions MISC. Precautions UnpackingSee Figure B Product FeaturesSee Figure B To Fill The Chain Oil Tank PRE-START InstructionsTo Fill The Fuel Tank Operating InstructionsTo Stop The Polesaw/Pruner Figure D INSPECTION, MAINTENANCE, and Cleaning Figure C Please Read the Following Carefully TroubleshootingDescription Parts List POLESAW/PRUNER UnitHex Wrenches not shown Assembly Diagram POLESAW/PRUNER UnitDescription Parts List EngineAssembly Diagram -ENGINE Emission Control System Warranty Warranted Parts Warranty

95283 specifications

The Chicago Electric 95283 is a versatile and robust tool that has gained a reputation for its performance and reliability among DIY enthusiasts and professional tradespeople alike. This compact bench top band saw is designed to handle a variety of cutting tasks, making it a valuable addition to any workshop or home garage.

One of the standout features of the Chicago Electric 95283 is its powerful motor. Equipped with a 1.5 horsepower motor, this band saw delivers strong cutting performance, allowing users to effortlessly cut through various materials including wood, plastic, and even soft metals. The motor operates quietly, which enhances the user experience during long cutting sessions.

In terms of design, the Chicago Electric 95283 boasts a sturdy, all-steel construction that ensures durability and stability. The frame is designed to minimize vibrations, which enhances precision during operation. The saw table is spacious and can be adjusted to an angle for accurate bevel cuts, allowing users to perform more complex cutting tasks with ease.

The band saw features a user-friendly blade tracking adjustment knob, which helps maintain the tension and alignment of the blade. This tool is compatible with a variety of blade widths, enabling users to choose the best blade for their specific cutting needs. The saw also includes a blade guard, ensuring user safety while operating the tool.

Another significant characteristic of the Chicago Electric 95283 is its portability. Despite its robust construction, the band saw is relatively lightweight, making it easy to move around the workshop or take on job sites. This feature is particularly beneficial for contractors who require mobility without compromising on power.

In summary, the Chicago Electric 95283 stands out for its combination of power, precision, and portability. Whether tackling woodworking projects or metalworking tasks, this versatile band saw offers the performance needed to achieve professional-quality results. Its durable construction, user-friendly features, and adjustable capabilities make it an excellent choice for both novices and experienced craftsmen. As the DIY community continues to grow, tools like the Chicago Electric 95283 will play a crucial role in empowering individuals to bring their creative visions to life.
Top Page Image Contents