Operation
Master/Slave
Color Settings
(Legend™ 412 Only)
Blackout Mode
Display Mode
Pan Invert
Tilt Invert
Display Invert
The Master/Slave mode allows a group of Legend™ 412’s or Legend™ 412 VW’s (the slave units) to simultaneously duplicate the output of another Legend™ 412 or Legend™ 412 VW (the master unit) without a DMX controller.
1.Set each of the slave units:
a.Go to SLNd and press <ENTER>.
b.Select SL 1 (duplicates the master unit exactly) or SL 2 (offsets pan and tilt settings that creates a different look).
2.Set the master unit:
a.Go to SLNd and press <ENTER>.
b.Select NASt.
c.Go to ShNd and press <ENTER>.
d.Select the desired auto program (Sh 1~4).
Do not connect a Legend™ 412 together with a Legend™ 412 VW in Master/Slave mode.
•The master unit is the one that runs an auto program.
•Do not connect a DMX controller to the units configured for Master/Slave operation.
•The master unit should be the first unit in the DMX daisy string.
The color setting determines how the Legend™ 412 generates the white color based on various RGB settings.
1.Go to bALA and press <ENTER>.
2.Select red, Gree, or bLue.
3.Select the desired color value (125~255).
4.Repeat for the other colors.
This setting determines whether the Legend™ 412 or the Legend™ 412 VW starts playing an auto program when powered up or remains static in the “Home” position.
1.Go to bLnd and press <ENTER>.
2.Select YeS or no.
This setting determines whether the control panel display stays on indefinitely or turns off after 2 minutes of inactivity.
1.Go to Led and press <ENTER>.
2.Select YeS or no.
This setting allows the user to invert the direction of the pan control.
1.Go to PAn and press <ENTER>.
2.Select YeS or no.
This setting allows the user to invert the direction of the tilt control.
1.Go to tILt and press <ENTER>.
2.Select YeS or no.
This setting allows the user to invert the direction of the control panel display.
1.Go to Led and press <ENTER>.
2.Select on or oFF.
Legend™ 412 Series User Manual Rev. 5 |