Before You Begin
Safety Notes
Personal Safety
Mounting and
Rigging
Power and Wiring
Operation
Read all the following Safety Notes before working with this product. These Notes include important information about the installation, usage, and maintenance of this product.
There are no
Please refer to all applicable local codes and regulations for the proper installation of this product.
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing when operating because it may be very hot.
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to rain or moisture.
•Make sure there are no flammable materials close to this product while operating.
•When hanging this product, always secure it to a fastening device using a safety cable (not included).
•Do not carry this product from the head. Always use the base.
•Always make sure you are connecting this product to the proper voltage, as per the specifications in this manual or on the product’s specification label.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
•Do not operate this product if you see damage on the housing, lenses or cables. Have the damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 104° F (40° C). Do not operate this product at a higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact CHAUVET® Technical Support.
Legend™ 412 Series User Manual Rev. 5 |