Connecting the Amplifier, | continued |
4.Connect the loudspeaker cables to the amplifier channel output binding posts located on the back panel, (8) on the
The binding post terminals accept spade lugs, bare wire, or pins. Use the red terminal for the positive connection and the black terminal for the negative connection.
IMPORTANT
Tighten loudspeaker binding posts by hand only.
5. Plug the end of the AC power cord into the IEC power connector.
The amplifier is now ready for operation. See | Amplifier Operation, | on page 13. You |
can also reconfigure the amplifier for Multi Amp Throughput or bridged operation. See |
| |
Reconfiguration Options for the |
| on page 15. |
12 | Krell |