Bush Hog SM 60 manual Tractor Requirements and Recommendations, Operation

Page 12

G. Repeat steps “E” and “F” to other driveline sec- tion.

H.De-burr the ends of the drivelines and clean away all chips and filings. (Fig. 2-7)

I.Apply grease to inside of outer (female) driveline

Figure 2-4

Figure 2-6

section. Reassemble driveline and attach to tractor and implement. Pull on driveline section to make sure yokes lock into place.

J. Raise and lower implement to check for proper operation.

Figure 2-5

Figure 2-7

SECTION III

OPERATING PROCEDURES

3-1 TRACTOR REQUIREMENTS AND RECOMMENDATIONS

3-1.1 Requirements

The tractor shall weigh a minimum of 6000 lbs. (2722 kg) not including ballast to prevent tractor upset. A PTO rating of not less than 50 horsepower

is required. The 3-point hitch shall have stabilizer bars, sway blocks, chains or equivalent to prevent mower swaying. Tractor rear wheel base (outside of tire to outside of tire) shall not exceed 92 inches (233.7 cm).

3-1.2 Recommendations

Tractor should have front end ballast (weights) to help prevent front end skidding. Tractor should be equipped with Rollover Protective System (ROPS) and a seat belt used. Check chains for 3-point hitch are recommended on tractors without position con- trol stop adjustment to prevent accidental dragging of slide assembly on ground.

WARNING

WHEN CUTTING WITH ANY SIDE MOUNT ROTARY CUTTER, IT IS LIKELY THAT SOME DEBRIS WILL BE THROWN TOWARD OPER- ATION. IT IS HIGHLY RECOMMENDED THAT OPERATOR BE PROTECTED BY ROLLOVER PROTECTIVE SYSTEM (ROPS) ENCLOSED CAB AND CUTTER DECK BE ENCLOSED BY FACTORY APPROVED PERMANENT BANDS OR SAFETY CHAINS. THE OPERATOR SHOULD WEAR SAFETY GLASSES AND SAFETY (HARD) HAT FOR PERSONAL PRO- TECTION.

3-2 OPERATION

A. Perform BEFORE EACH USE maintenance listed in Table 4-1.

B. Make certain parking stand is pinned in the up position. (Fig. 2-2)

C. Remove deck transport lock pin and place in storage holes. (Fig. 2-3)

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Bush HOG Congratulations Table of Contents Retail CUSTOMER’S Responsibility Under the Bush HOG WarrantyThis Limited Warranty Shall not Apply Disclaimer of Implied Warranties & Consequential DamagesDealer Preparation Check List SM60 Rotary CutterImportant Safety Precautions Important Safety Precautions EMPLOYERS, Employees and Operations Employee Tractor Operating InstructionsThis Act Seeks Osha RegulationsSection IntroductionDescription Mounting Cutter on Tractor For Cast Iron Pump & Motor OnlySM160R Driveline Modification Tractor Requirements and Recommendations OperationRecommendations Reversing Blade Rotation ParkingMaintenance Check List Maintenance Check ListStorage Lubrication Refer to FigRecommended Hydraulic Oils YearlyBlade Holder Installation Blade ReplacementCable Adjustment Adjusting Hydraulic PressureTroubleshooting List of Recommended Hydraulic Oils ManufacturerGeneral Troubleshooting Trouble Probable Cause RemedySection Assembly Basic Machine Assembly Hydraulic Valve KitOptional Safety Chain Installation Belting InstallationOptional Sidewheel Installation Optional Tailwheel Installation AdjustmentSafety Decals 83374 83373 83377 82617 83375 Torque Specifications Recommended Torque in Foot Pounds Newton Meters

SM 60 specifications

The Bush Hog SM 60 is a versatile and durable rotary mower designed primarily for use in agricultural and landscaping applications. Known for its robust construction and exceptional performance, this machine is ideal for managing grass, brush, and overgrown vegetation, making it a valuable asset for farmers, ranchers, and landowners alike.

One of the main features of the Bush Hog SM 60 is its cutting width, which measures 60 inches. This allows for efficient mowing of large areas, reducing the time spent on maintenance tasks. The mower is equipped with a heavy-duty gearbox that provides reliable power transmission while enhancing its overall durability. This ensures that the SM 60 can handle tough mowing conditions with ease.

The design of the Bush Hog SM 60 incorporates a sturdy frame made from high-quality materials, which provides stability and strength. The mower is built to withstand harsh environments and frequent use, ensuring long-lasting performance. Additionally, the SM 60 features a reinforced deck that helps to prevent soil buildup and maintains clean, efficient cutting.

Technologically, the Bush Hog SM 60 is equipped with a set of three high-lift blades that are designed for superior cutting performance. These blades facilitate efficient grass distribution, resulting in a clean cut that promotes healthy regrowth. Furthermore, the blade design reduces the risk of clumping, which is especially crucial in wet conditions.

Another noteworthy characteristic of the SM 60 is its adjustable cutting height. Users can easily modify the height of the mower to achieve the desired level of cut, providing flexibility for different mowing conditions and types of vegetation. This feature is particularly beneficial when transitioning between various terrains, ensuring optimal performance no matter the situation.

The Bush Hog SM 60 is designed to be compatible with a variety of tractors, making it a versatile tool for any operator. Its ease of attachment and operation allows users to quickly switch from one implement to another, enhancing overall productivity.

In summary, the Bush Hog SM 60 is a powerful rotary mower that combines durability with efficiency. Its impressive features, including a wide cutting deck, robust construction, and high-performance blades, make it an exceptional choice for anyone in need of a reliable mowing solution. Whether it's for maintaining pastureland, managing brush, or enhancing landscape aesthetics, the Bush Hog SM 60 stands out as a top-tier option in the rotary mower market.
Top Page Image Contents